TRS3232CDBR
Obsolete3- TO 5.5-V DUAL CHANNEL 250KBPS RS-232 LINE DRIVER/RECEIVER WITH +/-15-KV ESD PROTECTION
Deep-Dive with AI
Search across all available documentation for this part.
TRS3232CDBR
Obsolete3- TO 5.5-V DUAL CHANNEL 250KBPS RS-232 LINE DRIVER/RECEIVER WITH +/-15-KV ESD PROTECTION
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | TRS3232CDBR |
|---|---|
| Data Rate | 250 KBd |
| Duplex | Full |
| Mounting Type | Surface Mount |
| Number of Drivers/Receivers [custom] | 2 |
| Number of Drivers/Receivers [custom] | 2 |
| Operating Temperature [Max] | 70 °C |
| Operating Temperature [Min] | 0 °C |
| Package / Case | 0.209 in, 5.3 mm |
| Package / Case | 16-SSOP |
| Protocol | RS232 |
| Receiver Hysteresis | 300 mV |
| Supplier Device Package | 16-SSOP |
| Type | Transceiver |
| Voltage - Supply [Max] | 5.5 V |
| Voltage - Supply [Min] | 3 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | N/A | 0 | $ 0.87 | |
| Texas Instruments | LARGE T&R | 1 | $ 1.42 | |
| 100 | $ 1.18 | |||
| 250 | $ 0.84 | |||
| 1000 | $ 0.64 | |||
Description
General part information
TRS3232 Series
The TRS3232E device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15-kV IEC ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The devices operate at data signaling rates up to 250 kbit/s and a maximum of 30-V/µs driver output slew rate.
The TRS3232E device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15-kV IEC ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The devices operate at data signaling rates up to 250 kbit/s and a maximum of 30-V/µs driver output slew rate.
Documents
Technical documentation and resources
