Specification	MCP14A0301T-E/KBA

Channel Type	Single
Current - Peak Output (Source, Sink) [custom]	3 A
Current - Peak Output (Source, Sink) [custom]	3 A
Driven Configuration	High-Side, Low-Side
Gate Type	IGBT
Input Type	Non-Inverting, Inverting
Logic Voltage - VIL, VIH	0.8 V, 2 V
Mounting Type	Wettable Flank, Surface Mount
Number of Drivers	1
Operating Temperature [Max]	125 °C
Operating Temperature [Min]	-40 °C
Package / Case	8-WFDFN Exposed Pad
Rise / Fall Time (Typ) [custom]	12 ns
Rise / Fall Time (Typ) [custom]	13 ns
Supplier Device Package	8-WDFN (2x2)
Voltage - Supply [Max]	18 V
Voltage - Supply [Min]	4.5 V

MCP14A0301 Series

3 A MOSFET Gate Driver with Low Threshold Input and Enable

Part	Number of Drivers	Logic Voltage - VIL, VIH	Driven Configuration	Rise / Fall Time (Typ) [custom]	Rise / Fall Time (Typ) [custom]	Package / Case	Gate Type	Voltage - Supply [Max]	Voltage - Supply [Min]	Supplier Device Package	Operating Temperature [Min]	Operating Temperature [Max]	Mounting Type	Input Type	Channel Type	Current - Peak Output (Source, Sink) [custom]	Current - Peak Output (Source, Sink) [custom]	Package / Case [custom]	Package / Case	Package / Case [y]	Package / Case [x]
Microchip Technology MCP14A0301T-E/KBA	1	0.8 V 2 V	High-Side Low-Side	12 ns	13 ns	8-WFDFN Exposed Pad	IGBT	18 V	4.5 V	8-WDFN (2x2)	-40 °C	125 °C	Surface Mount Wettable Flank	Inverting Non-Inverting	Single	3 A	3 A
Microchip Technology MCP14A0301T-E/MS	1	0.8 V 2 V	High-Side Low-Side	12 ns	13 ns	8-MSOP 8-TSSOP	IGBT	18 V	4.5 V	8-MSOP	-40 °C	125 °C	Surface Mount	Inverting Non-Inverting	Single	3 A	3 A	0.118 in	3 mm
Microchip Technology MCP14A0301T-E/SN	1	0.8 V 2 V	High-Side Low-Side	12 ns	13 ns	8-SOIC	IGBT	18 V	4.5 V	8-SOIC	-40 °C	125 °C	Surface Mount	Inverting Non-Inverting	Single	3 A	3 A			3.9 mm	0.154 in
Microchip Technology MCP14A0301-E/MS	1	0.8 V 2 V	High-Side Low-Side	12 ns	13 ns	8-MSOP 8-TSSOP	IGBT	18 V	4.5 V	8-MSOP	-40 °C	125 °C	Surface Mount	Inverting Non-Inverting	Single	3 A	3 A	0.118 in	3 mm

Pricing

Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly

Distributor	Package	Quantity	$

Digikey	Cut Tape (CT)	1	$ 1.11
		25	$ 0.92
		100	$ 0.83
	Digi-Reel®	1	$ 1.11
		25	$ 0.92
		100	$ 0.83
	Tape & Reel (TR)	3000	$ 0.83
Microchip Direct	T/R	1	$ 1.11
		25	$ 0.92
		100	$ 0.83
		1000	$ 0.80
Newark	Each (Supplied on Cut Tape)	100	$ 0.85

Description

General part information

MCP14A0301 Series

The MCP14A0301/2 are high-speed MOSFET gate drivers that are capable of providing up to 3.0 A of peak current while operating from a single 4.5 V to 18 V supply. The inverting (MCP14A0301) or non-inverting (MCP14A0302) single channel output is directly controlled from either TTL or CMOS (2 V to 18 V) logic. These devices also feature low shoot-through current, matched rise and fall times, and short propagation delays which make them ideal for high switching frequency applications.

The MCP14A0301/2 MOSFET gate drivers offer enhanced control with Enable functionality. The active-high Enable pin can be driven low to drive the output of the MCP14A0301/2 low, regardless of the status of the Input pin. An integrated pull-up resistor allows the user to leave the Enable pin floating for standard operation.

Additionally, the MCP14A0301/2 devices feature separate ground pins (AGND and GND), allowing greater noise isolation between the level-sensitive Input/ Enable pins and the fast, high-current transitions of the push-pull output stage.

Documents

Technical documentation and resources

Technical Data Sheet EN

Datasheet

AN3343 Low-Side MOSFET Gate Drivers in Power Applications

Application Notes