
TPS71202DRCT
Active250-MA, DUAL-CHANNEL LOW-DROPOUT VOLTAGE REGULATOR WITH ENABLE
Deep-Dive with AI
Search across all available documentation for this part.

TPS71202DRCT
Active250-MA, DUAL-CHANNEL LOW-DROPOUT VOLTAGE REGULATOR WITH ENABLE
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | TPS71202DRCT |
|---|---|
| Control Features | Enable, Power Good |
| Current - Output | 250 mA |
| Current - Supply (Max) [Max] | 600 µA |
| Mounting Type | Surface Mount |
| Number of Regulators | 2 |
| Operating Temperature [Max] | 125 °C |
| Operating Temperature [Min] | -40 °C |
| Output Configuration | Positive |
| Output Type | Adjustable |
| Package / Case | 10-VFDFN Exposed Pad |
| Protection Features | Under Voltage Lockout (UVLO), Reverse Polarity, Over Temperature |
| PSRR [Max] | 59 dB |
| PSRR [Min] | 54 dB |
| Supplier Device Package | 10-VSON (3x3) |
| Voltage - Input (Max) [Max] | 5.5 V |
| Voltage - Output (Max) [Max] | 5.5 V |
| Voltage - Output (Min/Fixed) | 1.2 V |
| Voltage Dropout (Max) [Max] | 0.4 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 2.92 | |
| 10 | $ 2.62 | |||
| 25 | $ 2.48 | |||
| 100 | $ 2.15 | |||
| Digi-Reel® | 1 | $ 2.92 | ||
| 10 | $ 2.62 | |||
| 25 | $ 2.48 | |||
| 100 | $ 2.15 | |||
| Tape & Reel (TR) | 250 | $ 2.04 | ||
| 500 | $ 1.83 | |||
| 1250 | $ 1.54 | |||
| 2500 | $ 1.47 | |||
| 6250 | $ 1.41 | |||
| Texas Instruments | SMALL T&R | 1 | $ 2.44 | |
| 100 | $ 2.02 | |||
| 250 | $ 1.45 | |||
| 1000 | $ 1.09 | |||
Description
General part information
TPS71202-EP Series
The TPS712xx family of low-dropout (LDO) voltage regulators is tailored to noise-sensitive and RF applications. These products feature dual 250 mA LDOs with ultralow noise, high power-supply rejection ratio (PSRR), and fast transient and start-up response. Each regulator output is stable with low-cost 2.2 µF ceramic output capacitors and features very low dropout voltages (125 mV typical at 250 mA). Each regulator achieves fast start-up times (approximately 60 µs with a 0.001 µF bypass capacitor) while consuming very low quiescent current (300 µA typical with both outputs enabled). When the device is placed in standby mode, the supply current is reduced to less than 0.3 µA typical. Each regulator exhibits approximately 32 µrms of output voltage noise with VOUT= 2.8 V and a 0.01 µF noise reduction (NR) capacitor. Applications with analog components that are noise-sensitive, such as portable RF electronics, will benefit from high PSRR, low noise, and fast line and load transient features. The TPS712 family is offered in a thin 3mm × 3mm SON package and is fully specified from –40°C to +125°C (TJ).
The TPS712xx family of low-dropout (LDO) voltage regulators is tailored to noise-sensitive and RF applications. These products feature dual 250 mA LDOs with ultralow noise, high power-supply rejection ratio (PSRR), and fast transient and start-up response. Each regulator output is stable with low-cost 2.2 µF ceramic output capacitors and features very low dropout voltages (125 mV typical at 250 mA). Each regulator achieves fast start-up times (approximately 60 µs with a 0.001 µF bypass capacitor) while consuming very low quiescent current (300 µA typical with both outputs enabled). When the device is placed in standby mode, the supply current is reduced to less than 0.3 µA typical. Each regulator exhibits approximately 32 µrms of output voltage noise with VOUT= 2.8 V and a 0.01 µF noise reduction (NR) capacitor. Applications with analog components that are noise-sensitive, such as portable RF electronics, will benefit from high PSRR, low noise, and fast line and load transient features. The TPS712 family is offered in a thin 3mm × 3mm SON package and is fully specified from –40°C to +125°C (TJ).
Documents
Technical documentation and resources