VN5050JTR-E
ActivePOWER LOAD DISTRIBUTION SWITCH, HIGH SIDE, 13 V INPUT, 19 A, 0.05 OHM, 1 OUTPUT, POWERSSO-12
Deep-Dive with AI
Search across all available documentation for this part.
VN5050JTR-E
ActivePOWER LOAD DISTRIBUTION SWITCH, HIGH SIDE, 13 V INPUT, 19 A, 0.05 OHM, 1 OUTPUT, POWERSSO-12
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | VN5050JTR-E |
|---|---|
| Current - Output (Max) [Max] | 13.5 A |
| Fault Protection | Over Voltage, Open Load Detect, Over Temperature, Current Limiting (Fixed) |
| Features | Auto Restart |
| Input Type | Non-Inverting |
| Interface | On/Off |
| Mounting Type | Surface Mount |
| Number of Outputs | 1 |
| Operating Temperature [Max] | 150 °C |
| Operating Temperature [Min] | -40 °C |
| Output Configuration | High Side |
| Output Type | N-Channel |
| Package / Case | 12-PowerLSOP (0.154", 3.90mm Width) |
| Ratio - Input:Output | 1:1 |
| Rds On (Typ) | 50 mOhm |
| Supplier Device Package | PowerSSO-12™ |
| Switch Type | General Purpose |
| Voltage - Load [Max] | 36 V |
| Voltage - Load [Min] | 4.5 V |
| Voltage - Supply (Vcc/Vdd) | Not Required |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 2.34 | |
| 10 | $ 2.10 | |||
| 25 | $ 1.98 | |||
| 100 | $ 1.69 | |||
| 250 | $ 1.58 | |||
| 500 | $ 1.39 | |||
| 1000 | $ 1.15 | |||
| Digi-Reel® | 1 | $ 2.34 | ||
| 10 | $ 2.10 | |||
| 25 | $ 1.98 | |||
| 100 | $ 1.69 | |||
| 250 | $ 1.58 | |||
| 500 | $ 1.39 | |||
| 1000 | $ 1.15 | |||
| N/A | 27717 | $ 2.12 | ||
| Tape & Reel (TR) | 2500 | $ 1.07 | ||
| 5000 | $ 1.03 | |||
| Newark | Each (Supplied on Cut Tape) | 1 | $ 2.60 | |
| 10 | $ 1.97 | |||
| 25 | $ 1.92 | |||
| 50 | $ 1.87 | |||
| 100 | $ 1.82 | |||
| 250 | $ 1.76 | |||
| 500 | $ 1.72 | |||
| 1000 | $ 1.69 | |||
Description
General part information
VN5050J-E Series
The VN5050J-E is a monolithic device made using STMicroelectronics VIPower technology. It is intended for driving resistive or inductive loads with one side connected to ground. Active VCCpin voltage clamp protects the device against low energy spikes (see ISO7637 transient compatibility table). The device detects open load condition both in on and off state, when STAT_DIS is left open or driven low. Output shorted to VCCis detected in the off state.
When STAT_DIS is driven high, the STATUS pin is in a high impedance condition.Output current limitation protects the device in overload condition. In case of long duration overload, the device limits the dissipated power to safe level up to thermal shut-down intervention.Thermal shutdown with automatic restart allows the device to recover normal operation as soon as fault condition disappears.
Documents
Technical documentation and resources