TPS25810TWRVCRQ1
ActiveAUTOMOTIVE USB TYPE-C™ REV 1.2 DFP CONTROLLER AND POWER SWITCH WITH LOAD DETECTION
Deep-Dive with AI
Search across all available documentation for this part.
TPS25810TWRVCRQ1
ActiveAUTOMOTIVE USB TYPE-C™ REV 1.2 DFP CONTROLLER AND POWER SWITCH WITH LOAD DETECTION
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | TPS25810TWRVCRQ1 |
|---|---|
| Applications | USB |
| Grade | Automotive |
| Mounting Type | Surface Mount |
| Package / Case | 20-WFQFN Exposed Pad |
| Qualification | AEC-Q100 |
| Voltage - Supply [Max] | 6.5 V |
| Voltage - Supply [Min] | 4.5 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 2.13 | |
| 10 | $ 1.91 | |||
| 25 | $ 1.80 | |||
| 100 | $ 1.54 | |||
| 250 | $ 1.44 | |||
| 500 | $ 1.26 | |||
| 1000 | $ 1.05 | |||
| Digi-Reel® | 1 | $ 2.13 | ||
| 10 | $ 1.91 | |||
| 25 | $ 1.80 | |||
| 100 | $ 1.54 | |||
| 250 | $ 1.44 | |||
| 500 | $ 1.26 | |||
| 1000 | $ 1.05 | |||
| Tape & Reel (TR) | 3000 | $ 0.97 | ||
| 6000 | $ 0.94 | |||
| Texas Instruments | LARGE T&R | 1 | $ 1.44 | |
| 100 | $ 1.26 | |||
| 250 | $ 0.89 | |||
| 1000 | $ 0.71 | |||
Description
General part information
TPS25810A-Q1 Series
The TPS25810A-Q1 device is a USB Type-C downstream-facing port (DFP) controller with an integrated 3-A rated USB power switch. The device monitors the Type-C configuration channel (CC) lines to determine when a USB device is attached. If an upstream-facing port (UFP) device is attached, it applies power to VBUSand communicate the selectable VBUScurrent-sourcing capability to the UFP via the pass-through CC line. If the UFP is attached using an electronically marked cable, it also applies VCONNpower to the cable CC pin. The TPS25810A-Q1 can identify and report when Type-C audio or debug accessories are attached.
The TPS25810A-Q1 device draws less than 0.7 µA (typical) from the AUX pin when no USB load is connected. Additional system power saving is achievable in the S4 and S5 system power states by using theUFPoutput to disable the high-power 5-V supply when no UFP is attached. In this mode, the device is capable of running from an auxiliary supply (AUX), which can be a lower-voltage supply (3.3 V), typically powering the system microcontroller in low-power states (S4 and S5).
The TPS25810A-Q1 device integrates a 34-mΩ power switch with a fixed 3.4-A current limit independent of the Type-C current advertisement level. TheFAULToutput signals when the switch is in an overcurrent or overtemperature condition. TheCSoutput is used for implementing digital cable compensation for load currents greater than 1.95 A. Cable compensation, also known as line drop compensation, is a means of offsetting voltage droop from the USB power supply to the UFP load.
Documents
Technical documentation and resources
