Development Boards, Kits, Programmers

TPS61178EVM-792

Active

Texas Instruments

EVAL BOARD FOR TPS61178

Deep-Dive with AI

Search across all available documentation for this part.

DocumentsDatasheet

Development Boards, Kits, Programmers

TPS61178EVM-792

Active

Texas Instruments

EVAL BOARD FOR TPS61178

Deep-Dive with AI

DocumentsDatasheet

Specifications Series Pricing Description Documents

Technical Specifications

Parameters and characteristics for this part

Specification	TPS61178EVM-792

Board Type	Fully Populated
Current - Output	2.2 A
Frequency - Switching	500 kHz
Main Purpose	DC/DC, Step Up
Outputs and Type	Non-Isolated
Outputs and Type	1
Regulator Topology	Boost
Supplied Contents	Board(s)
Utilized IC / Part	TPS61178
Voltage - Input [Max]	12 V
Voltage - Input [Min]	5.4 V
Voltage - Output	16 V

TPS611781 Series

20-V, 10-A fully integrated sync boost with load disconnect

Part	Output Type	Current - Output	Output Configuration	Voltage - Output (Min/Fixed)	Frequency - Switching	Mounting Type	Supplier Device Package	Voltage - Input (Max) [Max]	Number of Outputs	Topology	Package / Case	Voltage - Input (Min) [Min]	Operating Temperature [Min]	Operating Temperature [Max]	Function	Voltage - Output (Max) [Max]	Frequency - Switching [Max]	Frequency - Switching [Min]	Regulator Topology	Utilized IC / Part	Main Purpose	Outputs and Type	Outputs and Type	Supplied Contents	Voltage - Input [Max]	Voltage - Input [Min]	Board Type	Voltage - Output
Texas Instruments TPS611781RNWT	Adjustable	10 A	Positive	4.5 V	2.2 MHz	Surface Mount	13-VQFN-HR (3x3.5)	20 V	1	Boost	13-PowerVFQFN	2.7 V	-40 °C	125 ¯C	Step-Up	20 V
Texas Instruments TPS61178RNWT	Adjustable	10 A	Positive	4.5 V		Surface Mount	13-VQFN-HR (3x3.5)	20 V	1	Boost	13-PowerVFQFN	2.7 V	-40 °C	125 ¯C	Step-Up	20 V	2.2 MHz	200 kHz
Texas Instruments TPS61178EVM-792		2.2 A			500 kHz														Boost	TPS61178	DC/DC Step Up	Non-Isolated	1	Board(s)	12 V	5.4 V	Fully Populated	16 V
Texas Instruments TPS611781RNWR	Adjustable	10 A	Positive	4.5 V	2.2 MHz	Surface Mount	13-VQFN-HR (3x3.5)	20 V	1	Boost	13-PowerVFQFN	2.7 V	-40 °C	125 ¯C	Step-Up	20 V
Texas Instruments TPS61178RNWR	Adjustable	10 A	Positive	4.5 V		Surface Mount	13-VQFN-HR (3x3.5)	20 V	1	Boost	13-PowerVFQFN	2.7 V	-40 °C	125 ¯C	Step-Up	20 V	2.2 MHz	200 kHz

Pricing

Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly

Distributor	Package	Quantity	$

Digikey	Bulk	1	$ 58.80

Description

General part information

TPS611781 Series

The TPS61178x family is a 20-V synchronous Boost converter with the gate driver built-in for load disconnect. The TPS61178x integrates two low on-resistance power FETs: A 16-mΩ switching FET and a 16-mΩ rectifier FET.

The TPS61178x uses the fixed frequency peak current mode control with the slope compensation integrated. At the light load, the TPS61178 enters into the auto PFM mode while TPS611781 is in the forced PWM mode.

The TPS61178x could isolate the output from input side when shutdown. Once the output is shorted, it enters into the hiccup mode to lower the thermal stress and can recover automatically after the short releases. Additionally, the TPS61178x also has OVP and thermal protection to avoid the fault operation. The TPS61178x is in a 3.0-mm x 3.5-mm 13-pin VQFN package with enhanced thermal dissipation.

Documents

Technical documentation and resources