Zenode.ai Logo
Beta
C04-029 MB
Integrated Circuits (ICs)

LR8N8-G

Active
Microchip Technology

1.2V-440V ADJUSTABLE POSITIVE REGULATOR, PSSO3

Deep-Dive with AI

Search across all available documentation for this part.

DocumentsDatasheet
C04-029 MB
Integrated Circuits (ICs)

LR8N8-G

Active
Microchip Technology

1.2V-440V ADJUSTABLE POSITIVE REGULATOR, PSSO3

Deep-Dive with AI

DocumentsDatasheet

Technical Specifications

Parameters and characteristics for this part

SpecificationLR8N8-G
Current - Output10 mA
Mounting TypeSurface Mount
Number of Regulators1
Operating Temperature [Max]85 °C
Operating Temperature [Min]-40 °C
Output ConfigurationPositive
Output TypeAdjustable
Package / CaseTO-243AA
Protection FeaturesOver Current, Over Temperature
PSRR60 dB
Supplier Device PackageTO-243AA (SOT-89)
Voltage - Input (Max) [Max]450 V
Voltage - Output (Max) [Max]438 V
Voltage - Output (Min/Fixed)1.2 V

Pricing

Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly

DistributorPackageQuantity$
DigikeyCut Tape (CT) 1$ 0.83
25$ 0.71
100$ 0.63
Digi-Reel® 1$ 0.83
25$ 0.71
100$ 0.63
Tape & Reel (TR) 2000$ 0.63

Description

General part information

LR8 Series

LR8 is a high voltage, low output current, adjustable linear regulator. It has a wide operating input voltage range of 13.2 - 450V. The output voltage can be adjusted from 1.20 - 440V provided that the input voltage is at least 12V greater than the output voltage. The output voltage can be adjusted by means of two external resistors R1 and R2 as shown in the typical application circuits. The LR8 regulates the voltage difference between VOUT and ADJ pins to a nominal value of 1.20V. The 1.20V is amplified by the external resistor ratio R1 and R2. An internal constant bias current of typically 10µA is connected to the ADJ pin. This increases VOUT by a constant voltage of 10µA times R2.

The LR8 has current limiting and temperature limiting. The output current limit is typically 20mA and the minimum temperature limit is 125°C. An output short circuit current will therefore be limited to 20mA. When the junction temperature reaches its temperature limit, the output current and/or output voltage will decrease to keep the junction temperature from exceeding its temperature limit. For SMPS start-up circuit applications, the LR8 turns off when an external voltage greater than the output voltage of the LR8 is applied to VOUT of the LR8. To maintain stability, a bypass capacitor of 1.0µF or larger and a minimum DC output current of 500µA are required.

The device is available in TO-243AA (SOT-89), TO-252 (D-PAK), and TO-92 packages.

Documents

Technical documentation and resources