
TPS65100EVM-030
ActiveEVAL MODULE FOR TPS65100-030
Deep-Dive with AI
Search across all available documentation for this part.

TPS65100EVM-030
ActiveEVAL MODULE FOR TPS65100-030
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | TPS65100EVM-030 |
|---|---|
| Board Type | Fully Populated |
| Current - Output | 20 mA, 300 mA, 650 mA |
| Frequency - Switching | 1.6 MHz |
| Main Purpose | Special Purpose DC/DC, LCD Supply |
| Outputs and Type | 4 |
| Outputs and Type | Non-Isolated |
| Power - Output | 6.81 W |
| Regulator Topology | Buck |
| Supplied Contents | Board(s) |
| Utilized IC / Part | TPS65100 |
| Voltage - Input | 3.3 V |
| Voltage - Output | 5V, 23V, -5V, 10V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Bulk | 1 | $ 58.80 | |
Description
General part information
TPS65100 Series
The TPS6510x series offers a compact and small power supply solution that provides all three voltages required by thin film transistor (TFT) LCD displays. The auxiliary linear regulator controller can be used to generate a 3.3-V logic power rail for systems powered by a 5-V supply rail only.
The main output VO1, is a 1.6-MHz, fixed-frequency PWM boost converter providing the source drive voltage for the LCD display. The device is available in two versions with different internal switch current limits to allow the use of a smaller external inductor when lower output power is required. The TPS65100/01 has a typical switch current limit of 2.3 A, and the TPS65105 has a typical switch current limit of 1.37 A. A fully integrated adjustable charge pump doubler/tripler provides the positive LCD gate drive voltage. An externally adjustable negative charge pump provides the negative gate drive voltage. Due to the high 1.6-MHz switching frequency of the charge pumps, inexpensive and small 220-nF capacitors can be used.
The TPS6510x series has an integrated VCOM buffer to power the LCD backplane. For LCD panels powered by 5 V only, the TPS6510x series has a linear regulator controller using an external transistor to provide a regulated 3.3-V output for the digital circuits. For maximum safety, the TPS65100/05 goes into shutdown as soon as one of the outputs is out of regulation. The device can be enabled again by toggling the input or the enable (EN) pin to GND. The TPS65101 does not enter shutdown when one of the outputs is below its power good threshold.
Documents
Technical documentation and resources