LMC6035IMX/NOPB
ActiveOP AMP DUAL LOW POWER AMPLIFIER R-R O/P 15.5V 8-PIN SOIC T/R
Deep-Dive with AI
Search across all available documentation for this part.
LMC6035IMX/NOPB
ActiveOP AMP DUAL LOW POWER AMPLIFIER R-R O/P 15.5V 8-PIN SOIC T/R
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | LMC6035IMX/NOPB |
|---|---|
| Amplifier Type | CMOS |
| Current - Input Bias | 0.02 pA |
| Current - Output / Channel | 8 mA |
| Current - Supply | 650 µA |
| Gain Bandwidth Product | 1.4 MHz |
| Mounting Type | Surface Mount |
| Number of Circuits | 2 |
| Operating Temperature [Max] | 85 °C |
| Operating Temperature [Min] | -40 °C |
| Output Type | Differential, Rail-to-Rail |
| Package / Case | 8-SOIC |
| Package / Case [x] | 0.154 in |
| Package / Case [y] | 3.9 mm |
| Slew Rate | 1.5 V/µs |
| Supplier Device Package | 8-SOIC |
| Voltage - Input Offset | 500 çV |
| Voltage - Supply Span (Max) [Max] | 15.5 V |
| Voltage - Supply Span (Min) [Min] | 2 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 1.75 | |
| 10 | $ 1.57 | |||
| 25 | $ 1.48 | |||
| 100 | $ 1.26 | |||
| 250 | $ 1.19 | |||
| 500 | $ 1.04 | |||
| 1000 | $ 0.86 | |||
| Digi-Reel® | 1 | $ 1.75 | ||
| 10 | $ 1.57 | |||
| 25 | $ 1.48 | |||
| 100 | $ 1.26 | |||
| 250 | $ 1.19 | |||
| 500 | $ 1.04 | |||
| 1000 | $ 0.86 | |||
| Tape & Reel (TR) | 2500 | $ 0.80 | ||
| 5000 | $ 0.77 | |||
| 12500 | $ 0.74 | |||
| Newark | Each (Supplied on Cut Tape) | 1 | $ 2.13 | |
| 10 | $ 2.04 | |||
| 25 | $ 1.94 | |||
| 50 | $ 1.85 | |||
| 100 | $ 1.78 | |||
| 250 | $ 1.72 | |||
| 500 | $ 1.67 | |||
| 1000 | $ 1.65 | |||
| Texas Instruments | LARGE T&R | 1 | $ 1.32 | |
| 100 | $ 1.09 | |||
| 250 | $ 0.78 | |||
| 1000 | $ 0.59 | |||
Description
General part information
LMC6035-Q1 Series
The LMC6035-Q1 is an economical, low-voltage op amp capable of rail-to-rail output swing into loads of 600Ω. These devices also feature a well behaved decrease in specifications at supply voltages less than the specified 2.7V operation. This decrease provides a comfort zone for adequate operation at voltages significantly less than 2.7V. The ultra low input current (IB) makes this device and excellent choice for low-power, active-filter applications because a low IB allows the use of higher resistor values and lower capacitor values. In addition, the drive capability of the LMC6035-Q1 makes this op amp an excellent choice in a broad range of applications for low-voltage systems.
The LMC6035-Q1 is an economical, low-voltage op amp capable of rail-to-rail output swing into loads of 600Ω. These devices also feature a well behaved decrease in specifications at supply voltages less than the specified 2.7V operation. This decrease provides a comfort zone for adequate operation at voltages significantly less than 2.7V. The ultra low input current (IB) makes this device and excellent choice for low-power, active-filter applications because a low IB allows the use of higher resistor values and lower capacitor values. In addition, the drive capability of the LMC6035-Q1 makes this op amp an excellent choice in a broad range of applications for low-voltage systems.
Documents
Technical documentation and resources
