HVLED001BTR
ActiveHIGH POWER FACTOR FLYBACK CONTROLLER WITH CONSTANT VOLTAGE PRIMARY SENSING AND ULTRA LOW STANDBY CONSUMPTION
HVLED001BTR
ActiveHIGH POWER FACTOR FLYBACK CONTROLLER WITH CONSTANT VOLTAGE PRIMARY SENSING AND ULTRA LOW STANDBY CONSUMPTION
Technical Specifications
Parameters and characteristics for this part
| Specification | HVLED001BTR |
|---|---|
| Applications | General Purpose |
| Dimming | PWM |
| Internal Switch(s) | False |
| Mounting Type | Surface Mount |
| Number of Outputs | 1 |
| Operating Temperature [Max] | 125 °C |
| Operating Temperature [Min] | -40 C |
| Package / Case | 0.154 in, 3.9 mm |
| Package / Case | 10-SOP |
| Supplier Device Package | 10-SSOP |
| Topology | Step-Up (Boost), Flyback, Step-Down (Buck), SEPIC |
| Type | AC DC Offline Switcher |
| Voltage - Supply (Max) [Max] | 18 V |
| Voltage - Supply (Min) [Min] | 7.3 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 2.15 | |
| 10 | $ 1.94 | |||
| 25 | $ 1.83 | |||
| 100 | $ 1.56 | |||
| 250 | $ 1.46 | |||
| 500 | $ 1.28 | |||
| 1000 | $ 1.06 | |||
| Digi-Reel® | 1 | $ 2.15 | ||
| 10 | $ 1.94 | |||
| 25 | $ 1.83 | |||
| 100 | $ 1.56 | |||
| 250 | $ 1.46 | |||
| 500 | $ 1.28 | |||
| 1000 | $ 1.06 | |||
| N/A | 16144 | $ 1.97 | ||
| Tape & Reel (TR) | 2500 | $ 0.99 | ||
| 5000 | $ 0.95 | |||
| Newark | Each (Supplied on Cut Tape) | 1 | $ 1.93 | |
| 10 | $ 1.72 | |||
| 25 | $ 1.64 | |||
| 50 | $ 1.58 | |||
| 100 | $ 1.56 | |||
| 250 | $ 1.52 | |||
| 500 | $ 1.50 | |||
| 1000 | $ 1.47 | |||
Description
General part information
HVLED001 Series
The EVAL-SSR01B-35W is intended to drive one LED string with a maximum output current of 700 mA.
The LED current can be adjusted by a PWM signal and the EN/DIS is managed on the board injecting an analog signal of 3.3 V. Both dimming and EN/DIS signals can also be provided by an external microcontroller thanks to a dedicated circuitry available on the PCB. The current dimming range is supported between 100% and 10% of maximum load.
On the secondary side, the board includes a connector to inject the PWM signal (Dimming) and the 3.3 V analog voltage (EN/DIS).
Documents
Technical documentation and resources
