Zenode.ai Logo
Beta
VQFN (RGE)
Integrated Circuits (ICs)

TPS65282RGER

Active
Texas Instruments

4.5V TO 18V INPUT, 4A OUTPUT SYNCHRONOUS BUCK CONVERTER WITH DUAL POWER DISTRIBUTION SWITCHES

Deep-Dive with AI

Search across all available documentation for this part.

VQFN (RGE)
Integrated Circuits (ICs)

TPS65282RGER

Active
Texas Instruments

4.5V TO 18V INPUT, 4A OUTPUT SYNCHRONOUS BUCK CONVERTER WITH DUAL POWER DISTRIBUTION SWITCHES

Technical Specifications

Parameters and characteristics for this part

SpecificationTPS65282RGER
Current - Output (Max) [Max]2.7 A
Fault ProtectionOver Temperature, UVLO, Current Limiting (Adjustable)
FeaturesStatus Flag, Slew Rate Controlled
InterfaceOn/Off
Mounting TypeSurface Mount
Number of Outputs2
Operating Temperature [Max]125 °C
Operating Temperature [Min]-40 C
Output ConfigurationHigh Side
Output TypeN-Channel
Package / Case24-VFQFN Exposed Pad
Ratio - Input:Output1:1
Rds On (Typ)100 mOhm
Supplier Device Package24-VQFN (4x4)
Switch TypeUSB Switch
Voltage - Load [Max]18 V
Voltage - Load [Min]4.5 V
Voltage - Supply (Vcc/Vdd)Not Required

Pricing

Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly

DistributorPackageQuantity$
DigikeyCut Tape (CT) 1$ 4.00
Digi-Reel® 1$ 4.00
N/A 0$ 2.53
140850$ 2.53
Tape & Reel (TR) 3000$ 2.01
Texas InstrumentsLARGE T&R 1$ 3.02
100$ 2.65
250$ 1.86
1000$ 1.50

Description

General part information

TPS65282 Series

The TPS65282 incorporates dual N-channel MOSFET power switches for USB power distribution systems that require dual power switches in a single package. It also integrates a buck monolithic converter. The device is intended to provide a total USB power distribution solution for digital TV, set-top boxes, tablet PC and VOIP phones etc applications, where precision current limiting is required or heavy capacitive loads or short circuits are encountered.

Dual 100-mΩ independent power distribution switch limits the output current to a programmable current limit threshold between typical 75 mA and 2.7 A by using an external resistor. The current limit accuracy can be achieved as tight as ±6% at higher current limit setting. TPS65282 device limits output current to a safe level by using a constant current mode when output load exceeds the current limit threshold. After deglitching time, TPS65282 provides circuit breaker functionality by latching off the power switch during over-current or reverse-voltage situations. Two back-to-back power MOSFETs prevents the current injects from output to input in shutdown. An internal reverse-voltage comparator disables the power switch when the output voltage is driven higher than the input to protect the circuits on the input side of the switch in normal operation. The nFAULT1/2 output asserts low during over-current and reverse-voltage conditions.

The buck DC/DC converter integrates power MOSFETs for optimized power efficiency and reduced external component. A wide 4.5-V to 18-V input supply range to buck encompasses most intermediate bus voltages operating off 5-V, 9-V, 12-V or 15-V power bus. Peak current mode control simplifies the compensation and fast transient response. Equipped with enable and soft-start pin, the DC/DC can be precisely sequenced and ramp up in order to align with other rails in the system. Cycle-by-cycle over-current protection and operating in hiccup mode limit MOSFET power dissipation during buck output short circuit or over loading fault conditions. The switching frequency of the converter can be programmed from 300 kHz to 1.4 MHz with an external resistor at ROSC pin. With ROSC pin connecting to V7V pin, floating, or grounding, a default fixed switching frequency can be selected. The buck also features a pulse skipping mode (PSM), which allows a power loss reduction on the input power supplied to the system to achieve high efficiency at light loading.