ADP195ACPZ-R7
ActivePOWER SWITCH, HIGH SIDE, ACTIVE HIGH, 1 OUTPUT, 3.6 V, 1.1 A, 0.07 OHM, -40 TO 85 °C, LFCSP-EP-6
Deep-Dive with AI
Search across all available documentation for this part.
ADP195ACPZ-R7
ActivePOWER SWITCH, HIGH SIDE, ACTIVE HIGH, 1 OUTPUT, 3.6 V, 1.1 A, 0.07 OHM, -40 TO 85 °C, LFCSP-EP-6
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | ADP195ACPZ-R7 |
|---|---|
| Current - Output (Max) | 1.1 A |
| Fault Protection | Reverse Current |
| Features | Slew Rate Controlled |
| Input Ratio | 1 |
| Input Type | Non-Inverting |
| Interface | On/Off |
| Mounting Type | Surface Mount |
| Number of Outputs | 1 |
| Operating Temperature (Max) | 125 °C |
| Operating Temperature (Min) | -40 °C |
| Output Configuration | High Side |
| Output Ratio | 1 |
| Output Type | P-Channel |
| Package / Case | CSP, 6-UDFN Exposed Pad |
| Package Length | 2 mm |
| Package Name | 6-LFCSP-UD |
| Package Width | 2 mm |
| Rds On (Typ) | 50 mOhm |
| Switch Type | General Purpose |
| Voltage - Load (Max) | 3.6 V |
| Voltage - Load (Min) | 1.1 V |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Voltage - Supply (Vdd/Vcc) | Not Required |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
CAD
3D models and CAD resources for this part
Description
General part information
ADP195 Series
The ADP195 is a high-side load switch designed for operation between 1.1 V to 3.6 V and protected against reverse current flow from output to input. This load switch provides power domain isolation helping extended power domain isolation. The device contains a low on-resistance, P-channel MOSFET that supports over 500 mA of continuous current and minimizes power loss. The low 1 μA of quiescent current and ultralow shutdown current make the ADP195 ideal for battery-operated portable equipment. The built-in level shifter for enable logic makes the ADP195 compatible with many processors and GPIO controllers.In addition to operating performance, the ADP195 occupies minimal printed circuit board (PCB) space with an area of less than 1.0 mm2and a height of 0.60 mm.It is available in an ultrasmall 1 mm × 1 mm, 4-ball, 0.5 mm pitch WLCSP. A 6-lead 2 mm × 2 mm × 0.55 mm, 0.65 mm pitch LFCSP is also available.APPLICATIONSMobile phonesDigital cameras and audio devicesGPS devicesPersonal media playersPortable and battery-powered equipment
