Development Boards, Kits, Programmers

OPA462EVM

Active

Texas Instruments

EVAL BOARD

Deep-Dive with AI

Search across all available documentation for this part.

DocumentsDatasheet

Development Boards, Kits, Programmers

OPA462EVM

Active

Texas Instruments

EVAL BOARD

Deep-Dive with AI

DocumentsDatasheet

Specifications Series Pricing Description Documents

Technical Specifications

Parameters and characteristics for this part

Specification	OPA462EVM

Amplifier Type	General Purpose
Board Type	Fully Populated
Channels per IC	1 - Single
Current - Output / Channel	45 mA
Current - Supply (Main IC)	3.2 mA
Output Type	Single-Ended
Slew Rate	32 V/çs
Supplied Contents	Board(s)
Utilized IC / Part	OPA462
Voltage - Supply, Single/Dual (±) [Max]	90 V, 180 V
Voltage - Supply, Single/Dual (±) [Min]	12 V, -6 V

OPA462 Series

180-V, wide bandwidth (6.5 MHz), high-slew rate (25 V/µs) unity-gain stable op amp

Part	Voltage - Input Offset	Mounting Type	Slew Rate	Number of Circuits	Operating Temperature [Max]	Operating Temperature [Min]	Supplier Device Package	Voltage - Supply Span (Max) [Max]	Gain Bandwidth Product	Amplifier Type	-3db Bandwidth	Package / Case [y]	Package / Case [x]	Package / Case	Current - Output / Channel	Current - Input Bias	Voltage - Supply Span (Min) [Min]	Current - Supply	Utilized IC / Part	Current - Supply (Main IC)	Board Type	Output Type	Voltage - Supply, Single/Dual (±) [Max]	Voltage - Supply, Single/Dual (±) [Min]	Supplied Contents	Channels per IC
Texas Instruments OPA462IDDAR	200 çV	Surface Mount	25 V/µs	1	85 °C	-40 °C	8-SO PowerPad	180 V	6.5 MHz	General Purpose	800 kHz	3.9 mm	0.154 in	8-PowerSOIC	30 mA	30 µA	12 V	3.2 mA
Texas Instruments OPA462IDDA	200 çV	Surface Mount	25 V/µs	1	85 °C	-40 °C	8-SO PowerPad	180 V	6.5 MHz	General Purpose		3.9 mm	0.154 in	8-PowerSOIC	30 mA	1.4 pA	12 V	3.2 mA
Texas Instruments OPA462EVM			32 V/çs							General Purpose					45 mA				OPA462	3.2 mA	Fully Populated	Single-Ended	90 V 180 V	-6 V 12 V	Board(s)	1 - Single

Pricing

Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly

Distributor	Package	Quantity	$

Digikey	Box	1	$ 118.80

Description

General part information

OPA462 Series

The OPA462 is a high voltage (180 V) and high current drive (45 mA) operational amplifier. The device is unity-gain stable and has a gain-bandwidth product of 6.5 MHz.

The OPA462 is internally protected against over-temperature conditions and current overloads. The device is fully specified to perform over a wide power-supply range of ±6 V to ±90 V, or on a single supply of 12 V to 180 V. The status flag is an open-drain output that allows the device to be easily referenced to standard low-voltage logic circuitry. This high-voltage operational amplifier provides excellent accuracy and wide output swing, and is free from phase inversion problems that are often found in similar amplifiers.

The output can be disabled using the enable-disable (E/D) pin. The E/D pin has a common return pin to allow for easy interface to low-voltage logic circuitry. This disable is accomplished without disturbing the input signal path, not only saving power but also protecting the load.

Documents

Technical documentation and resources