
Deep-Dive with AI
Search across all available documentation for this part.

Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | LP2951CM |
|---|---|
| Control Features | Enable |
| Current - Output | 100 mA |
| Current - Quiescent (Iq) | 120 µA |
| Current - Supply (Max) [Max] | 14 mA |
| Mounting Type | Surface Mount |
| Number of Regulators | 1 |
| Operating Temperature [Max] | 125 ¯C |
| Operating Temperature [Min] | -40 °C |
| Output Configuration | Positive |
| Output Type | Adjustable (Fixed) |
| Package / Case | 8-SOIC |
| Package / Case [x] | 0.154 in |
| Package / Case [y] | 3.9 mm |
| Protection Features | Over Temperature, Over Current, Short Circuit |
| Supplier Device Package | 8-SOIC |
| Voltage - Input (Max) [Max] | 30 V |
| Voltage - Output (Max) | 29 V |
| Voltage - Output (Min/Fixed) | 5 V |
| Voltage - Output (Min/Fixed) [Min] | 1.235 V |
| Voltage Dropout (Max) [Max] | 0.6 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Tube | 1 | $ 2.63 | |
| 10 | $ 1.70 | |||
| 25 | $ 1.45 | |||
| 100 | $ 1.18 | |||
| 250 | $ 1.04 | |||
| 500 | $ 0.96 | |||
| 1000 | $ 0.89 | |||
| 2500 | $ 0.82 | |||
| 5000 | $ 0.78 | |||
Description
General part information
LP2951-Q1 Series
The LP2950-N and LP2951-N are micropower voltage regulators with very low quiescent current (75 µA typical) and very low dropout voltage (typical 40 mV at light loads and 380 mV at 100 mA). They are ideally suited for use in battery-powered systems. Furthermore, the quiescent current of the device increases only slightly in dropout, prolonging battery life.
Careful design of the LP2950-N/LP2951-N has minimized all contributions to the error budget. This includes a tight initial tolerance (0.5% typical), extremely good load and line regulation (0.05% typical) and a very low output voltage temperature coefficient, making the part useful as a low-power voltage reference.
One such feature is anerrorflag output which warns of a low output voltage, often due to falling batteries on the input. It may be used for a power-on reset. A second feature is the logic-compatible shutdown input which enables the regulator to be switched on and off. Also, the part may be pin-strapped for a 5-V, 3-V, or 3.3-V output (depending on the version), or programmed from 1.24 V to 29 V with an external pair of resistors.
Documents
Technical documentation and resources
No documents available