DRV8836DSSR
Active11-V, 1.5-A DUAL H-BRIDGE MOTOR DRIVER WITH PHASE/ENABLE
Deep-Dive with AI
Search across all available documentation for this part.
DRV8836DSSR
Active11-V, 1.5-A DUAL H-BRIDGE MOTOR DRIVER WITH PHASE/ENABLE
Technical Specifications
Parameters and characteristics for this part
| Specification | DRV8836DSSR |
|---|---|
| Applications | Battery Powered |
| Current - Output | 1.5 A |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Interface | Parallel |
| Motor Type - AC, DC | Brushed DC |
| Motor Type - Stepper | Bipolar |
| Mounting Type | Surface Mount |
| Operating Temperature [Max] | 150 °C |
| Operating Temperature [Min] | -40 °C |
| Output Configuration | Half Bridge (4) |
| Package / Case | 12-WFDFN Exposed Pad |
| Supplier Device Package | 12-WSON (2x3) |
| Technology | Power MOSFET |
| Voltage - Load [Max] | 7 V |
| Voltage - Load [Min] | 2 V |
| Voltage - Supply [Max] | 7 V |
| Voltage - Supply [Min] | 2 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 1.64 | |
| 10 | $ 1.47 | |||
| 25 | $ 1.39 | |||
| 100 | $ 1.18 | |||
| 250 | $ 1.11 | |||
| 500 | $ 0.97 | |||
| 1000 | $ 0.81 | |||
| Digi-Reel® | 1 | $ 1.64 | ||
| 10 | $ 1.47 | |||
| 25 | $ 1.39 | |||
| 100 | $ 1.18 | |||
| 250 | $ 1.11 | |||
| 500 | $ 0.97 | |||
| 1000 | $ 0.81 | |||
| Tape & Reel (TR) | 3000 | $ 0.69 | ||
| Newark | Each (Supplied on Cut Tape) | 1 | $ 2.00 | |
| 10 | $ 1.91 | |||
| 25 | $ 1.82 | |||
| 50 | $ 1.74 | |||
| 100 | $ 1.66 | |||
| 250 | $ 1.61 | |||
| 500 | $ 1.57 | |||
| 1000 | $ 1.54 | |||
| Texas Instruments | LARGE T&R | 1 | $ 1.23 | |
| 100 | $ 1.02 | |||
| 250 | $ 0.73 | |||
| 1000 | $ 0.55 | |||
Description
General part information
DRV8836 Series
The DRV8836 provides an integrated motor driver solution for cameras, consumer products, toys, and other low-voltage or battery-powered motion control applications. The device has two H-bridge drivers, and can drive two DC motors or one stepper motor, as well as other devices like solenoids. The output driver block for each consists of N-channel power MOSFET configured as an H-bridge to drive the motor winding. An internal charge pump generates gate drive voltages.
The DRV8836 supplies up to 1.5-A of output current per H-bridge. It operates on a power supply voltage from 2 V to 7 V.
PHASE/ENABLE and IN/IN interfaces can be selected which are compatible with industry-standard devices. A low-power sleep mode is provided which turns off all unnecessary logic to provide a very low current state.
Documents
Technical documentation and resources
