T2550-12T25 A , 1200 V , Snubberless in TO-220AB Triac | Thyristors | 1 | Active | The T2550-12x is a 25 A 1200 V Snubberless Triac available in three packages: D²PAK, TO-220AB and TO-220AB insulated.
Its 1200 V blocking voltage enables use in 3-phase industrial application. Its noise immunity and dynamic commutation makes it suitable for either inductive, capacitive or resistive load control. |
T2650-6PF26A 600V Snubberless Triac in TO-3PF package | Thyristors | 1 | Active | Available in power package TO-3PF, the T2650-6PF Snubberless Triac is suitable for general purpose AC switching.
When used with the properly dimensioned heatsink, the T2650-6PF can enable AC switching systems up to 3 kW for 120 V AC mains. Refer to ST Application Note AN533 for thermal management of Triacs.
A Snubberless Triac, the T2650-6PF is recommended for industrial applications where high immunity and high surge current are required.
The T2650-6PF provides an insulated tab (rated at 2500 V rms). Recognized by UL, representative samples of this component have been evaluated by UL and meet applicable UL requirements for UL-1557 standard (File Ref. 81734). |
T303530 A - 800 V - 150 °C H-series Triac in TO-220AB Ins. | Thyristors | 1 | Active | Specifically designed to operate at 800 V and 150 °C, the T3035H-8I Triac housed in TO-220AB insulated provides an enhanced thermal management: this 30 A Triac is the right choice for a compact drive of heavy AC loads and enables the heatsink size reduction.
Based on the ST Snubberless high temperature technology, it offers higher specified turn off commutation and noise immunity levels up to the Tjmax.
The T3035H-8I safely optimizes the control of the hardest universal motors, heaters and inductive loads for industrial control and home appliances.
By using an internal ceramic pad, it provides a recognized voltage insulation, rated at 2500 VRMS. |
T3035H30 A - 600 V - 150 °C H-series Triacs | TRIACs | 4 | Active | Specifically designed to operate at 150 °C, the 30 A triacs T3050H provide very high dynamic and enhanced performance in terms of power loss and thermal dissipation. This allows the heatsink size optimization, leading to space and cost effectiveness when compared to electro-mechanical solutions.
Based on ST Snubberless technology, they offer a specified minimal commutation and high noise immunity levels valid up to the Tjmax.
These devices safely optimize the control of universal motors and inductive loads found in power tools and major appliances.
By using an internal ceramic pad, they provide voltage insulation (rated at 2500 VRMS). |
T3035H-8G30 A - 800 V - 150 °C H-series Triac in D²PAK | Thyristors | 2 | Active | Specifically designed to operate at 800 V and 150 °C, the T3035H-8G Triac housed in D²PAK provides an enhanced thermal management: this 30 A triac is the right choice for a compact drive of heavy AC loads and enables the heatsink size reduction.
Based on the ST Snubberless high temperature technology, it offers higher specified turn off commutation and noise immunity levels up to the Tjmax.
The T3035H-8G safely optimizes the control of the hardest universal motors, heaters and inductive loads for industrial control and home appliances.
Available in D²PAK package, it is suitable for compact SMD designs on surface mount boards or insulated metal substrate or direct bond copper boards. |
| Discrete Semiconductor Products | 4 | Active | |
T4054A logic level Triacs | Thyristors | 9 | Active | Based on ST’s Snubberless / logic level technology providing high commutation performances, the T4 series is suitable for use on AC inductive loads. They are recommended for applications using universal motors, electro valves, kitchen aid equipments, power tools, and dishwashers. |
| TRIACs | 1 | Active | |
| TRIACs | 1 | Active | Based on ST’s logic level technology providing high commutation performance, this device is suitable for use on AC low current loads. It is recommended for motor driving, electro valves, kitchen appliances, power tools and dishwashers. Available in a fully insulated package, it complies with standard UL1557. |
T4104 A - 600 V - 150 °C logic level H-series Triac in TO-220AB | Thyristors | 9 | Active | Specifically designed to operate at 150 °C, the new 4 A T410H TRIAC provides an enhanced performance in terms of power loss and thermal dissipation. This allows the optimization of the heatsink size, leading to space and cost effectiveness when compared to electromechanical solutions.
Based on ST logic level technology, the T410H offers an IGTlower than 10 mA and specified minimal commutation and high noise immunity levels valid up to the Tjmax. |
