STEVAL-MKI235KALIS2DUXS12 adapter kit for standard DIL24 socket with QVAR functionalities | Development Boards, Kits, Programmers | 1 | Active | The STEVAL-MKI235KA evaluation kit is based on the LIS2DUXS12 smart accelerometer with a Qvar electrostatic sensor and three different electrodes (swipe, finger, and generic) to make it compatible with the STEVAL-MKI109V3. The kit provides the complete LIS2DUXS12 pinout and comes ready-to-use with the required decoupling capacitors on the VDD power supply line. The STEVAL-MKE00xAA can be plugged into the STEVAL-MKI235A board.
This adapter is supported by the STEVAL-MKI109V3 motherboard, which includes a high-performance 32-bit microcontroller functioning as a bridge between the sensor and a PC.
It is also possible to plug the STEVAL-MKI235A board into an X-NUCLEO-IKS01A3 expansion board.
MEMS-Studio is a complete software solution for the evaluation and programming of all MEMS sensors and it is available for Linux, macOS, and Windows operating systems.
You can also use the downloadable graphical user interface (Unico-GUI) or dedicated software routines for customized applications. |
STEVAL-MKI237KALSM6DSV16BX adapter kit for standard DIL24 socket with QVAR and bone conduction functionalities | Evaluation Boards | 1 | Active | The STEVAL-MKI237KA evaluation kit is based on a specific PCB mounting the LSM6DSV16BX IMU (inertial measurement unit). The kit provides the complete LSM6DSV16BX pinout and comes ready to use with the required decoupling capacitors on the VDD power supply line.
There are two different boards inside the STEVAL-MKI237KA. One can be used as a standard application board and a small adapter can be put inside the earphone to verify the bone conduction feature. This small electrode flex connector can be used as the concept of the application. Both boards can be connected with the STEVAL-MKI109V3 using the STEVAL-MKIGI06A interface board.
This adapter is supported by the STEVAL-MKI109V3 motherboard, which includes a high-performance 32-bit microcontroller functioning as a bridge between the sensor and a PC.
It is also possible to plug the board into an X-NUCLEO-IKS01A3 expansion board.
MEMS-Studio is a complete software solution for the evaluation and programming of all MEMS sensors and it is available for Linux, macOS, and Windows operating systems.
You can also use the downloadable graphical user interface (Unico-GUI) or dedicated software routines for customized applications. |
| Development Boards, Kits, Programmers | 1 | Active | The STEVAL-MKI238A is an adapter board designed to facilitate the evaluation of the LIS2DUX12 3-axis smart accelerometer in the MEMS and sensors product portfolio. The board offers an effective solution for fast system prototyping and device evaluation directly within the user’s own application. The STEVAL-MKI238A can be plugged into a standard DIL24 socket. It provides the complete LIS2DUX12 pinout and embeds the required decoupling capacitors on the VDD power supply line.
The adapter is supported by the STEVAL-MKI109V3 motherboard, which includes a high-performance 32-bit microcontroller functioning as a bridge between the sensor and a PC.
Another option is to plug the adapter in the X-NUCLEO-IKS01A3 board to develop the proper application.
MEMS-Studio is a complete software solution for the evaluation and programming of all MEMS sensors and it is available for Linux, macOS, and Windows operating systems.
You can also use the downloadable graphical user interface Unico-GUI or dedicated software routines for customized applications. |
STEVAL-MKI240KALSM6DSV32X adapter kit for standard DIL24 socket with Qvar functionalities | Evaluation Boards | 1 | Active | The STEVAL-MKI240KA evaluation kit is based on the LSM6DSV32X inertial module with a Qvar electrostatic sensor and three different electrodes (swipe finger and generic) to make it compatible with the STEVAL-MKI109V3.
The kit provides the complete LSM6DSV32X pinout and comes ready-to-use with the required decoupling capacitors on the VDD power supply line.
The STEVAL-MKE00xA can be plugged into the STEVAL-MKI240KA board.
This adapter is supported by the STEVAL-MKI109V3 mother board, which includes a high performance 32-bit microcontroller functioning as a bridge between the sensor and a PC, on which it is possible to use the graphical user interfaces (like Unico-GUI or MEMS Studio), or dedicated software routines for customized applications.
It is also possible to plug the board into X-NUCLEO expansion boards like X-NUCLEO-IKS4A1. |
STEVAL-MKI242AST1VAFE6AX adapter kit for standard DIL24 socket with VAFE to measure biopotential signals from human body | Expansion Boards, Daughter Cards | 1 | Active | The STEVAL-MKI242A is an adapter board designed to facilitate the evaluation of MEMS devices in the ST1VAFE6AX product family. The board offers an effective solution for fast system prototyping and device evaluation directly within the user’s own application.
The STEVAL-MKI242A can be plugged into a standard DIL24 socket. The adapter provides the complete ST1VAFE6AX pinout and comes ready-to-use with the required decoupling capacitors on the VDD and VDDIO power supply lines. To use STEVAL-MKI242A is mandatory to use an ECG cable with a 3.5 mm phone jack.
This adapter is supported and tested by the STEVAL-MKI109V3 motherboard, which includes a high performance 32-bit microcontroller functioning as a bridge between the sensor and a PC, on which it is possible to use the downloadable graphical user interface (GUI or MEMS-Studio), or dedicated software routines for customized applications.
It is possible to use STEVAL-MKBOXPRO or X-NUCLEO-IKS4A1 instead of STEVAL-MKI109V3. |
STEVAL-MKI245KAISM330BX evaluation kit based on 6-axis IMU with wide bandwidth, low-noise accelerometer, embedded sensor fusion, and AI for industrial applications | Development Boards, Kits, Programmers | 1 | Active | The STEVAL-MKI245KA demonstration board is a kit made up of an ad hoc PCB, mounting the ISM330BX 6-axis IMU, which is connected through flat cable to a generic adapter board (STEVAL-MKIGI06A) to make it compatible with the STEVAL-MKI109V3. The presence of this square PCB ensures to put the sensor board on the system to be measured.
The device ISM330BX is soldered exactly in the center of the board.
The STEVAL-MKIGI06A can be plugged into a standard DIL 24 socket. The kit provides the complete ISM330BX pin-out and comes ready-to-use with the required decoupling capacitors on the VDD and VDDIO power supply lines.
This adapter is supported by the STEVAL-MKI109V3 motherboards which includes a high performance 32-bit microcontroller functioning as a bridge between the sensor and a PC, on which it is possible to use the downloadable graphical user interface (MEMS-Studio), or dedicated software routines for customized applications.
It is also possible to plug in the kit on X-NUCLEO-IKS02A1. |
| Expansion Boards, Daughter Cards | 1 | Obsolete | The STEVAL-MKIT03V1 is a MEMS sensor sample kit containing four sensor adapter boards that can be evaluated in standalone mode by simply connecting an I²C cable.
The STEVAL-MKI109V3 evaluation board, based on the STM32F401VET6 microcontroller, can be used for a more in-depth evaluation, as a bridge between the sensor adapter boards and a PC running STMicroelectronics graphical user interface (GUI) or an X-NUCLEO expansion board. |
STEVAL-NRG011TV200 W power supply based on STNRG011 digital combo for LED TV | Evaluation Boards | 1 | Active | The STEVAL-NRG011TV is a 200 W LED TV SMPS providing 12 V regulated output voltage (for MCU supply and audio system applications) and 65 V output voltage for LED back lighting.
The design is based on the STNRG011 IC digital combo controller that controls a two-stage AC/DC SMPS.
The front-end is a transition mode PFC pre-regulator and the second stage is an LLC HB resonant converter.
Thanks to the STNRG011 IC, the user can take full advantage of digital implementation without the need of writing code.
A complete set of parameters, stored in the controller non-volatile memory (NVM), allows the configuration and fine tuning of the application. |
| Development Boards, Kits, Programmers | 1 | Active | |
| Evaluation and Demonstration Boards and Kits | 1 | Active | The STEVAL-OET002V1 is a medium-dependent interface (MDI) board which includes the EMIF02-01OABRY filter, in compliance with BroadR-Reach™ specifications for EMI, ESD and differential impedance. BroadR-Reach™ (BRR) is an Ethernet, two unshielded twisted pair (UTP) wire protocol for data communication.
The STEVAL-OET002V1 board is able to filter parasitic and undesirable common and differential signals. |
