Beta

⌘K

S

STMicroelectronics

Series List(4163)

...

Series	Category	# Parts	Status	Description

Standalone parts(2458)

...

Part	Category	Description
STMicroelectronics EMIF09-SD01F3Obsolete	Filters	FILTER RC(PI) 40 OHM/20PF SMD
STMicroelectronics STM32F412ZGJ7	Integrated Circuits (ICs)	STM32 DYNAMIC EFFICIENCY MCU WITH BAM, HIGH-PERFORMANCE AND DSP WITH FPU, ARM CORTEX-M4 MCU WITH 1 MBYTE OF FLASH MEMORY, 100 MHZ CPU, ART ACCELERATOR, DFSDM
STMicroelectronics SPC560D40L1B3E0X	Integrated Circuits (ICs)	32-BIT POWER ARCHITECTURE MCU FOR AUTOMOTIVE BODY AND GATEWAY APPLICATIONS
STMicroelectronics SPC560D30L1B4E0X	Integrated Circuits (ICs)	MCU 32-BIT E200Z0H RISC 128KB FLASH 3.3V/5V AUTOMOTIVE AEC-Q100 64-PIN LQFP T/R
STMicroelectronics STEVAL-CCA036V1	Development Boards Kits Programmers	DEMONSTRATION BOARD FOR SINGLE CHANNEL OP-AMP IN SO8 PACKAGE
STMicroelectronics LDLN025J30RLTB	Integrated Circuits (ICs)	IC REG LINEAR 3V 250MA 4FLIPCHIP
STMicroelectronics ST25RU3993-EVALObsolete	Development Boards Kits Programmers	ST25RU3993 READER IC EVALUATION BOARD
STMicroelectronics STM32F401CBY6TT	Integrated Circuits (ICs)	ARM-BASED 32-BIT MCU+FPU, 84MHZ, 128KB FLASH, 49-PIN WLCSP, -40 TO 85°C T/R
STMicroelectronics STP12NM60NObsolete	Discrete Semiconductor Products	MOSFET N-CH 600V 10A TO220AB
STMicroelectronics VND1NV04Obsolete	Integrated Circuits (ICs)	IC PWR DRIVER N-CHANNEL 1:1 DPAK

Series	Category	# Parts	Status	Description

1.5KE220CA1500 W, 188 V TVS in DO-201	Circuit Protection	2	Active	The 1.5KE TVS series is designed to protect sensitive equipment against electrostatic discharges according to IEC 61000-4-2, MIL STD 883 Method 3015, and electrical overstress such as IEC 61000-4-4 and 5. They are used for surges below 1500 W 10/1000 μs. This planar technology makes it compatible with high-end equipment and SMPS where low leakage current and high junction temperature are required to provide reliability and stability over time.
1.5KE250A1500 W, 213 V TVS in DO-201	Diodes	1	Active	The 1.5KE TVS series is designed to protect sensitive equipment against electrostatic discharges according to IEC 61000-4-2, MIL STD 883 Method 3015, and electrical overstress such as IEC 61000-4-4 and 5. They are used for surges below 1500 W 10/1000 μs. This planar technology makes it compatible with high-end equipment and SMPS where low leakage current and high junction temperature are required to provide reliability and stability over time.
1.5KE30CA1500 W, 25.6 V TVS in DO-201	TVS Diodes	2	Active	The 1.5KE TVS series is designed to protect sensitive equipment against electrostatic discharges according to IEC 61000-4-2, MIL STD 883 Method 3015, and electrical overstress such as IEC 61000-4-4 and 5. They are used for surges below 1500 W 10/1000 μs. This planar technology makes it compatible with high-end equipment and SMPS where low leakage current and high junction temperature are required to provide reliability and stability over time.
1.5KE33CA1500 W, 28.2 V TVS in DO-201	TVS Diodes	1	Active	The 1.5KE TVS series is designed to protect sensitive equipment against electrostatic discharges according to IEC 61000-4-2, MIL STD 883 Method 3015, and electrical overstress such as IEC 61000-4-4 and 5. They are used for surges below 1500 W 10/1000 μs. This planar technology makes it compatible with high-end equipment and SMPS where low leakage current and high junction temperature are required to provide reliability and stability over time.
1.5KE350CA1500 W, 299 V TVS in DO-201	Circuit Protection	2	Active	The 1.5KE TVS series is designed to protect sensitive equipment against electrostatic discharges according to IEC 61000-4-2, MIL STD 883 Method 3015, and electrical overstress such as IEC 61000-4-4 and 5. They are used for surges below 1500 W 10/1000 μs. This planar technology makes it compatible with high-end equipment and SMPS where low leakage current and high junction temperature are required to provide reliability and stability over time.
1.5KE400A1500 W, 342 V TVS in DO-201	TVS Diodes	1	Active	The 1.5KE TVS series is designed to protect sensitive equipment against electrostatic discharges according to IEC 61000-4-2, MIL STD 883 Method 3015, and electrical overstress such as IEC 61000-4-4 and 5. They are used for surges below 1500 W 10/1000 μs. This planar technology makes it compatible with high-end equipment and SMPS where low leakage current and high junction temperature are required to provide reliability and stability over time.
1.5KE43	TVS Diodes	1	Obsolete
1.5KE440CA1500 W, 376 V TVS in DO-201	Transient Voltage Suppressors (TVS)	2	Active	The 1.5KE TVS series is designed to protect sensitive equipment against electrostatic discharges according to IEC 61000-4-2, MIL STD 883 Method 3015, and electrical overstress such as IEC 61000-4-4 and 5. They are used for surges below 1500 W 10/1000 μs. This planar technology makes it compatible with high-end equipment and SMPS where low leakage current and high junction temperature are required to provide reliability and stability over time.
1.5KE47CA1500 W, 40.2 V TVS in DO-201	Transient Voltage Suppressors (TVS)	1	Active	The 1.5KE TVS series is designed to protect sensitive equipment against electrostatic discharges according to IEC 61000-4-2, MIL STD 883 Method 3015, and electrical overstress such as IEC 61000-4-4 and 5. They are used for surges below 1500 W 10/1000 μs. This planar technology makes it compatible with high-end equipment and SMPS where low leakage current and high junction temperature are required to provide reliability and stability over time.
1.5KE56A1500 W, 47.8 V TVS in DO-201	TVS Diodes	3	Active	The 1.5KE TVS series is designed to protect sensitive equipment against electrostatic discharges according to IEC 61000-4-2, MIL STD 883 Method 3015, and electrical overstress such as IEC 61000-4-4 and 5. They are used for surges below 1500 W 10/1000 μs. This planar technology makes it compatible with high-end equipment and SMPS where low leakage current and high junction temperature are required to provide reliability and stability over time.