ADG3308 Series

The ADG3308 is a bidirectional level translator containing eight bidirectional channels. The ADG3308 can be used in multivoltage digital system applications, such as a data transfer between a low voltage DSP controller and a higher voltage device. The internal architecture allows the device to perform bidirectional level translation without an additional signal to set the direction in which the translation takes place.The voltage applied to VCCAsets the logic levels on the A side of the device, and VCCYsets the levels on the Y side. For proper operation, VCCAmust always be less than VCCY. The VCCAcompatible logic signals applied to the A side of the device appear as VCCYcompatible levels on the Y side. Similarly, VCCYcompatible logic levels applied to the Y side of the device appear as VCCAcompatible logic levels on the A side.The enable pin (EN) provides three-state operation on both the A side and the Y side pins. When the EN pin is pulled low, the terminals on both sides of the device are in the high impedance state. For normal operation, EN should be driven high.The ADG3308 is available in a compact 20-lead TSSOP and a 20-lead LFCSP. The EN pin is referred to the VCCYsupply voltage.The ADG3308 is guaranteed to operate over the 1.15 V to 5.5 V supply voltage range and the extended −40°C to +85°C temperature range.Product HighlightsBidirectional logic level translation.Fully guaranteed over the 1.15 V to 5.5 V supply range.No direction pin.Packages: 20-lead TSSOP and 20-lead LFCSPApplicationsLow voltage ASIC level translationSmart card readersCell phones and cell phone cradlesPortable communication devicesTelecommunications equipmentNetwork switches and routersStorage systems (SAN/NAS)Computing/server applicationsGPSPortable POS systemsLow cost serial interfaces