Catalog
Triple DC Power Monitor, 16-bit, 2 Alert, I2C
Key Features
• High-Side Current Monitor with Three Channels* 100 mV Full-Scale Range (configurable to 50mV)
• * External Sense Resistor Sets the Full-Scale Current Range
• * 16-Bit Resolution
•
• Voltage Monitor with Wide VBUS Range* 0V to 32V FSR (configurable to 16V)
• * 16-bit Resolution
•
• Real-Time Auto-Calibration of Offset Error for Voltage and Current
•
• 1% Power Measurement Accuracy over a Wide Dynamic Range
•
• On-Chip Accumulation of 30-bit Power Results for Energy Measurement* User programmable sampling rates of 8, 64, 256 and 1024 SPS
• * 5120 SPS for a single channel in Burst mode
•
• 2.7V to 5.5V Supply Operation* 1.62-5.5V capable I2C/SMBus and digital I/O
• * SMBus 3.1 and I2C Fast Mode Plus, 1 Mbps
• * High-Speed mode (3.4 Mbps)
•
• Two Independent ALERT/GPIO pins* ALERT on Over/Undervoltage and Current or Overpower conditions
• * b Counting: When Selected, the Accumu lator Accumulates VSENSE Values
Description
AI
The PAC1953 is a triple power monitor and energy monitor that reports on bus voltage and sense voltage 16-bits of resolution. Power is reported as a simultaneous product of two 16-bit independent bus and sense voltages. All registers are accessible through I2C / SMBus including an 8 sample average for reading stability. The device can detect over/undervoltage, over/undercurrent and overpower against user programmed limits for each channel and generate ALERT outputs.
