AD5324 Series

2.5 V to 5.5 V, 500µA Quad Voltage Output 12-Bit DAC in 10-Lead Packages

Catalog

2.5 V to 5.5 V, 500µA Quad Voltage Output 12-Bit DAC in 10-Lead Packages

Part	Data Interface	Supplier Device Package	Voltage - Supply, Analog [Max]	Voltage - Supply, Analog [Min]	Architecture	Number of Bits	Output Type	Number of D/A Converters	Package / Case	Package / Case [x]	Package / Case [x]	Operating Temperature [Min]	Operating Temperature [Max]	Voltage - Supply, Digital [Min]	Voltage - Supply, Digital [Max]	Reference Type	Settling Time	INL/DNL (LSB)	Mounting Type	Supplied Contents	DAC Type	Number of DAC's	Utilized IC / Part
Analog Devices AD5324SRMZ-EP-RL7	DSP SPI	10-MSOP	5.5 V	2.5 V	String DAC	12 bits	Voltage - Buffered	4	10-MSOP 10-TFSOP	3 mm	0.118 in	-55 °C	125 °C	2.5 V	5.5 V	External	10 µs	0.2 LSB 2 LSB	Surface Mount
Analog Devices EVAL-AD5324DBZ	Serial SPI					12 bits											8 µs			Board(s)	Voltage	4	AD5324
Analog Devices AD5324BRM	DSP SPI	10-MSOP	5.5 V	2.5 V	String DAC	12 bits	Voltage - Buffered	4	10-MSOP 10-TFSOP	3 mm	0.118 in	-40 °C	105 ░C	2.5 V	5.5 V	External	10 µs	0.2 LSB 2 LSB	Surface Mount
Analog Devices AD5324BRMZ-REEL7	DSP SPI	10-MSOP	5.5 V	2.5 V	String DAC	12 bits	Voltage - Buffered	4	10-MSOP 10-TFSOP	3 mm	0.118 in	-40 °C	105 ░C	2.5 V	5.5 V	External	10 µs	0.2 LSB 2 LSB	Surface Mount
Analog Devices AD5324BRM-REEL7	DSP SPI	10-MSOP	5.5 V	2.5 V	String DAC	12 bits	Voltage - Buffered	4	10-MSOP 10-TFSOP	3 mm	0.118 in	-40 °C	105 ░C	2.5 V	5.5 V	External	10 µs	0.2 LSB 2 LSB	Surface Mount
Analog Devices AD5324ACPZ-REEL7	DSP SPI	10-LFCSP-WD (3x3)	5.5 V	2.5 V	String DAC	12 bits	Voltage - Buffered	4	10-VFDFN Exposed Pad CSP			-40 °C	105 ░C	2.5 V	5.5 V	External	10 µs	0.2 LSB 2 LSB	Surface Mount

Catalog

2.5 V to 5.5 V, 500µA Quad Voltage Output 12-Bit DAC in 10-Lead Packages

Key Features

• 4 buffered 12-Bit DACs in 10-lead MSOP and 10-lead LFCSP

• A, W Version: ±16 LSB INL, B Version: ±10 LSB INL

• Low power operation: 500μA @ 3V, 600μA @ 5V

• 2.5V to 5.5V power supply

• Guaranteed monotonic by design over all codes

• Power-down to 80nA @ 3V, 200nA @ 5V

• Double-buffered input logic

• Output range: 0V to VREF

• Power-on reset to 0V

• See data sheet for additional features

• DownloadAD5324-EP Data Sheet(pdf)

• Military temperature range (−55°C to +125°C)

• Controlled manufacturing baseline

• One assembly/test site

• One fabrication site

• Enhanced product change notification

• Qualification data available on request

• V62/12628 DSCC Drawing Number

Description

TheAD5304/AD5314/AD5324 are quad 8-, 10-, and 12-bit buffered voltage output DACs in 10-lead MSOP and 10-lead LFCSP packages that operate from a single 2.5 V to 5.5 V supply, consuming 500 μA at 3 V. Their on-chip output amplifiers allow rail-to-rail output swing to be achieved with a slew rate of 0.7 V/μs. A 3-wire serial interface is used; it operates at clock rates up to 30 MHz and is compatible with standard SPI, QSPI, MICROWIRE, and DSP interface standards.The references for the four DACs are derived from one reference pin. The outputs of all DACs can be updated simultaneously using the softwareLDACfunction. The parts incorporate a power-on reset circuit, and ensure that the DAC outputs power up to 0 V and remains there until a valid write takes place to the device. The parts contain a power-down feature that reduces the current consumption of the device to 200 nA @ 5 V (80 nA @ 3 V).The low power consumption of these parts in normal operation makes them ideally suited to portable battery-operated equipment. The power consumption is 3 mW at 5 V, 1.5 mW at 3 V, reducing to 1 μW in power-down mode.ApplicationsPortable battery-powered instrumentsDigital gain and offset adjustmentProgrammable voltage and current sourcesProgrammable attenuatorsIndustrial process controls