AD9214 Series

10-Bit, 65 MSPS/80 MSPS/105 MSPS 3 V Analog-to-Digital Converter

Catalog

10-Bit, 65 MSPS/80 MSPS/105 MSPS 3 V Analog-to-Digital Converter

Part	Number of Bits [custom]	Mounting Type	Supplier Device Package	Operating Temperature [Max]	Operating Temperature [Min]	Package / Case [custom]	Package / Case	Package / Case [custom]	Sampling Rate (Per Second)	Number of A/D Converters	Data Interface	Voltage - Supply, Analog [Min]	Voltage - Supply, Analog [Max]	Number of Inputs	Ratio - S/H:ADC	Configuration	Voltage - Supply, Digital [Max]	Voltage - Supply, Digital [Min]	Input Type	Reference Type	Architecture
Analog Devices AD9214BRS-RL80	10	Surface Mount	28-SSOP	85 °C	-40 °C	0.209 in	28-SSOP	5.3 mm	80 M	1	Parallel
Analog Devices AD9214BRS-RL105	10	Surface Mount	28-SSOP	85 °C	-40 °C	0.209 in	28-SSOP	5.3 mm	105 M	1	Parallel	2.7 V	3.6 V	1	1:1	S/H-ADC	3.6 V	2.7 V	Differential Single Ended	Internal	Pipelined
Analog Devices AD9214BRS-65	10	Surface Mount	28-SSOP	85 °C	-40 °C	0.209 in	28-SSOP	5.3 mm	65 M	1	Parallel	2.7 V	3.6 V	1	1:1	S/H-ADC	3.6 V	2.7 V	Differential Single Ended	Internal	Pipelined
Analog Devices AD9214BRSZ-RL80	10	Surface Mount	28-SSOP	85 °C	-40 °C	0.209 in	28-SSOP	5.3 mm	80 M	1	Parallel	2.7 V	3.6 V	1	1:1	S/H-ADC	3.6 V	2.7 V	Differential Single Ended	Internal	Pipelined

Catalog

10-Bit, 65 MSPS/80 MSPS/105 MSPS 3 V Analog-to-Digital Converter

Key Features

• SNR = 57 dB at 39 MHz Analog input (–0.5 dBFS)

• Low power

• 190 mW at 65 MSPS

• 285 mW at 105 MSPS

• 30 mW power-down mode

• 300 MHz analog bandwidth

• On-chip reference and track/hold

• 1 V p-p or 2 V p-p Analog input range option

• Single 3.3 V supply operation (2.7 V to 3.6 V)

• Twos complement or offset binary data format option

Description

The AD9214 is a 10-bit monolithic sampling analog-to-digital converter (ADC) with an on-chip track-and-hold circuit, and is optimized for low cost, low power, small size, and ease of use. The product operates up to 105 MSPS conversion rate with outstanding dynamic performance over its full operating range.The ADC requires only a single 3.3 V (2.7 V to 3.6 V) power supply and an encode clock for full performance operation. No external reference or driver components are required for many applications. The digital outputs are TTL/CMOS compatible and a separate output power supply pin supports interfacing with 3.3 V or 2.5 V logic.The clock input is TTL/CMOS compatible. In the power-down state, the power is reduced to 30 mW. A gain option allows support for either 1 V p-p or 2 V p-p analog signal input swing.Fabricated on an advanced CMOS process, the AD9214 is available in a 28-lead surface-mount plastic package (28-SSOP) specified over the industrial temperature range −40°C to +85°C).APPLICATIONSBattery-powered instrumentsHand-held scopemetersLow-cost digital oscilloscopesUltrasound equipmentCable reverse pathBroadband wirelessResidential power line networksPRODUCT HIGHLIGHTSHigh Performance.Outstanding ac performance from 65 MSPS to 105 MSPS. SNRgreater than 55 dB typical and as high as 58 dB.Low Power.The AD9214 at 285 mW consumes a fraction of the poweravailable in existing high-speed monolithic solutions. In sleepmode, power is reduced to 30 mW.Single Supply.The AD9214 uses a single 3 V supply, simplifying system powersupply design. It also features a separate digital output driversupply line to accommodate 2.5 V logic families.Small Package.The AD9214 is packaged in a small 28-lead surface-mountplastic package (28-SSOP).