AD4111 Series

Single Supply, 24-Bit, Sigma-Delta ADC with ±10 V and 0 mA to 20 mA Inputs, Open Wire Detection

Catalog

Single Supply, 24-Bit, Sigma-Delta ADC with ±10 V and 0 mA to 20 mA Inputs, Open Wire Detection

Part	Architecture	Voltage - Supply, Analog [Max]	Voltage - Supply, Analog [Min]	Features	Reference Type	Data Interface	Supplier Device Package	Number of Inputs	Mounting Type	Number of A/D Converters	Number of Bits	Ratio - S/H:ADC	Sampling Rate (Per Second)	Input Type	Configuration	Package / Case	Operating Temperature [Min]	Operating Temperature [Max]	Voltage - Supply, Digital [Max]	Voltage - Supply, Digital [Min]
Analog Devices AD4111BCPZ	Sigma-Delta	5.5 V	2 V	Internal Oscillator Temperature Sensor	External Internal	Serial SPI	40-LFCSP-VQ (6x6)	4 8	Surface Mount	1	24	0:1	6.2 k	Differential Single Ended	MUX-S/H-ADC	40-VFQFN Exposed Pad CSP	-40 °C	105 ░C	5.5 V	2 V
Analog Devices AD4111BCPZ-RL7	Sigma-Delta	5.5 V	2 V	Internal Oscillator Temperature Sensor	External Internal	Serial SPI	40-LFCSP-VQ (6x6)	4 8	Surface Mount	1	24	0:1	6.2 k	Differential Single Ended	MUX-S/H-ADC	40-VFQFN Exposed Pad CSP	-40 °C	105 ░C	5.5 V	2 V

Catalog

Single Supply, 24-Bit, Sigma-Delta ADC with ±10 V and 0 mA to 20 mA Inputs, Open Wire Detection

Key Features

• Tested for robustness per: IEC6100-4-2, IEC6100-4-3, IEC6100-4-4, IEC6100-4-5, IEC6100-4-6, CISPR 11

• 24-bit ADC with integrated analog front endFast and flexible output rate: 1.25 SPS to 31.25 kSPSChannel scan data rate of 6.21 kSPS per channel (161 μs settling)16 noise free bits at 1 kSPS per channel85 dB rejection of 50 Hz and 60 Hz at 20 SPS per channel

• Fast and flexible output rate: 1.25 SPS to 31.25 kSPS

• Channel scan data rate of 6.21 kSPS per channel (161 μs settling)

• 16 noise free bits at 1 kSPS per channel

• 85 dB rejection of 50 Hz and 60 Hz at 20 SPS per channel

• ±10 V inputs, 4 differential or 8 single-endedPin absolute maximum rating ±50 VAbsolute input pin voltage up to ±20 V≥1 MΩ impedance±0.06% accuracy at 25°COpen wire detection

• Pin absolute maximum rating ±50 V

• Absolute input pin voltage up to ±20 V

• ≥1 MΩ impedance

• ±0.06% accuracy at 25°C

• Open wire detection

• 0 mA to 20 mA inputs, 4 single-endedPin absolute maximum rating ±50 mAInput range from −0.5 mA to +24 mA60 Ω impedance±0.08% accuracy at 25°C

• Pin absolute maximum rating ±50 mA

• Input range from −0.5 mA to +24 mA

• 60 Ω impedance

• ±0.08% accuracy at 25°C

• On-chip 2.5 V reference±0.12% accuracy at 25°C, ±5 ppm/°C (typical) drift

• ±0.12% accuracy at 25°C, ±5 ppm/°C (typical) drift

• Internal or external clock

• Power suppliesAVDD = 3.0 V to 5.5 VIOVDD = 2 V to 5.5 VTotal IDD= 3.9 mA

• AVDD = 3.0 V to 5.5 V

• IOVDD = 2 V to 5.5 V

• Total IDD= 3.9 mA

• Temperature range: −40°C to +105°C

• 3-wire or 4-wire serial digital interface (Schmitt trigger on SCLK)SPI, QSPI, MICROWIRE, and DSP compatible

• SPI, QSPI, MICROWIRE, and DSP compatible

Description

The AD4111 is a low power, low noise, 24-bit, sigma-delta (Σ-Δ) analog-to-digital converter (ADC) that integrates an analog front end (AFE) for fully differential or single-ended, high impedance (≥1 MΩ) bipolar, ±10 V voltage inputs, and 0 mA to 20 mA current inputs.The AD4111 also integrates key analog and digital signal conditioning blocks to configure eight individual setups for each analog input channel in use. The AD4111 features a maximum channel scan rate of 6.21 kSPS (161 µs) for fully settled data.The embedded 2.5 V, low drift (5 ppm/°C), band gap internal reference (with output reference buffer) reduces the external component count.The digital filter allows flexible settings, including simultaneous 50 Hz and 60 Hz rejection at a 27.27 SPS output data rate. The user can select between the different filter settings depending on the demands of each channel in the application. The automatic channel sequencer enables the ADC to switch through each enabled channel.The precision performance of the AD4111 is achieved by integrating the proprietaryiPassives™technology from Analog Devices, Inc. The AD4111 is factory calibrated to achieve a high degree of specified accuracy.The AD4111 also has the unique feature of open wire detection on the voltage inputs for system level diagnostics using a single 5 V or 3.3 V power supply.The AD4111 operates with a single power supply, making it easy to use in galvanically isolated applications. The specified operating temperature range is −40°C to +105°C. The AD4111 is housed in a 40-lead, 6 mm × 6 mm LFCSP package.APPLICATIONSProcess controlPLC and DCS modulesInstrumentation and measuremen