Catalog
4 Ch, 16-bit, 32V Power Monitor, 2 alert, I2C
Key Features
• High-Side/ Low-Side Power Monitor with 4 Channels* 100 mV Full-Scale Range (configurable to 50 mV)
• * External Sense Resistor Sets the Full-Scale Range Current
•
• 16-Bit Resolution Sense Current* Voltage Monitor with Wide VBus Range
•
• 0V to 32V FSR (configurable to 16V)* 16-Bit Resolution
•
• Real-Time Auto-Calibration of Offset Errorfor Voltage and Current
•
• 1% Power Measurement Accuracy Over a Wide Dynamic Range
•
• On-Chip Accumulation of 30-Bit Power Results for Energy Measurement* User Programmable Sampling Rates of 8, 64, 256, 1024
• * 5120 SPS for a Single Channel Burst Mode
•
• 2.7V to 5.5V Supply Operation* 1.62-5.5V Capable I2C/SMBus and Digital I/O
• * SMBus 3.1 and I2C Fast Mode Plus, 1 Mbps
• * High Speed Mode (3.4 Mbps)
•
• ALERT on Over/Undervoltage and Current or Overpower Conditions* Two Independent ALERT/GPIO Pins
• * Coulomb Counting: When Selected, the Accumu lator Accumulates VSENSE Values
Description
AI
The PAC1954 is a quad power monitor and energy monitor that reports on bus voltage and sense voltage 16-bits of resolution. Power is reported as a simultaneous product of two 16-bit independent bus and sense voltages. All registers are accessible through I2C / SMBus including an 8 sample average for reading stability. The device can detect over/undervoltage, over/undercurrent and overpower against user programmed limits for each channel and generate ALERT outputs.
