
PIC16LF18313 Series
Manufacturer: Microchip Technology
Catalog
IC MCU 8BIT 3.5KB FLASH 8MSOP
| Part | Data Converters [custom] | Data Converters [custom] | Data Converters [custom] | Data Converters [custom] | Core Processor | Connectivity | Program Memory Type | RAM Size | Core Size | Mounting Type | Operating Temperature [Max] | Operating Temperature [Min] | Package / Case | Package / Case [custom] | Package / Case | Voltage - Supply (Vcc/Vdd) [Max] | Voltage - Supply (Vcc/Vdd) [Min] | Speed | Program Memory Size | EEPROM Size | Supplier Device Package | Number of I/O | Oscillator Type | Qualification | Package / Case [y] | Package / Case [x] | Grade | Package / Case |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Microchip Technology | 5 | 1 | 10 | 5 | PIC | I2C LINbus SPI UART/USART | FLASH | 256 x 8 | 8-Bit | Surface Mount | 85 °C | -40 °C | 8-MSOP 8-TSSOP | 0.118 in | 3 mm | 5.5 V | 2.3 V | 32 MHz | 3.5 KB | 256 x 8 | 8-MSOP | 6 I/O | Internal | |||||
Microchip Technology | 5 | 1 | 10 | 5 | PIC | I2C LINbus SPI UART/USART | FLASH | 256 x 8 | 8-Bit | Surface Mount | 125 °C | -40 °C | 8-UDFN Exposed Pad | 5.5 V | 2.3 V | 32 MHz | 3.5 KB | 256 x 8 | 8-UDFN (3x3) | 6 I/O | Internal | |||||||
Microchip Technology | 5 | 1 | 10 | 5 | PIC | I2C LINbus SPI UART/USART | FLASH | 256 x 8 | 8-Bit | Surface Mount | 85 °C | -40 °C | 8-UDFN Exposed Pad | 5.5 V | 2.3 V | 32 MHz | 3.5 KB | 256 x 8 | 8-UDFN (3x3) | 6 I/O | Internal | |||||||
Microchip Technology | 5 | 1 | 10 | 5 | PIC | I2C LINbus SPI UART/USART | FLASH | 256 x 8 | 8-Bit | Surface Mount | 85 °C | -40 °C | 8-UDFN Exposed Pad | 3.6 V | 1.8 V | 32 MHz | 3.5 KB | 256 x 8 | 8-UDFN (3x3) | 6 I/O | Internal | |||||||
Microchip Technology | 5 | 1 | 10 | 5 | PIC | I2C LINbus SPI UART/USART | FLASH | 256 x 8 | 8-Bit | Surface Mount | 125 °C | -40 °C | 8-SOIC | 5.5 V | 2.3 V | 32 MHz | 3.5 KB | 256 x 8 | 8-SOIC | 6 I/O | Internal | AEC-Q100 | 3.9 mm | 0.154 in | Automotive | |||
Microchip Technology | 5 | 1 | 10 | 5 | PIC | I2C LINbus SPI UART/USART | FLASH | 256 x 8 | 8-Bit | Through Hole | 125 °C | -40 °C | 8-DIP | 0.3 in | 5.5 V | 2.3 V | 32 MHz | 3.5 KB | 256 x 8 | 8-PDIP | 6 I/O | Internal | 7.62 mm | |||||
Microchip Technology | 5 | 1 | 10 | 5 | PIC | I2C LINbus SPI UART/USART | FLASH | 256 x 8 | 8-Bit | Through Hole | 85 °C | -40 °C | 8-DIP | 0.3 in | 3.6 V | 1.8 V | 32 MHz | 3.5 KB | 256 x 8 | 8-PDIP | 6 I/O | Internal | 7.62 mm | |||||
Microchip Technology | 5 | 1 | 10 | 5 | PIC | I2C LINbus SPI UART/USART | FLASH | 256 x 8 | 8-Bit | Surface Mount | 125 °C | -40 °C | 8-SOIC | 5.5 V | 2.3 V | 32 MHz | 3.5 KB | 256 x 8 | 8-SOIC | 6 I/O | Internal | AEC-Q100 | 3.9 mm | 0.154 in | Automotive | |||
Microchip Technology | 5 | 1 | 10 | 5 | PIC | I2C LINbus SPI UART/USART | FLASH | 256 x 8 | 8-Bit | Surface Mount | 125 °C | -40 °C | 8-SOIC | 5.5 V | 2.3 V | 32 MHz | 3.5 KB | 256 x 8 | 8-SOIC | 6 I/O | Internal | 3.9 mm | 0.154 in | |||||
Microchip Technology | 5 | 1 | 10 | 5 | PIC | I2C LINbus SPI UART/USART | FLASH | 256 x 8 | 8-Bit | Surface Mount | 85 °C | -40 °C | 8-SOIC | 5.5 V | 2.3 V | 32 MHz | 3.5 KB | 256 x 8 | 8-SOIC | 6 I/O | Internal | 3.9 mm | 0.154 in |
Key Features
- Enhanced Mid-range Core with 49 Instruction, 16 Stack Levels
- Flash Program Memory with self read/write capability
- 256B EEPROM
- IDLE and DOZE low power modes
- Peripheral Module Disable (PMD)
- Peripheral Pin Select (PPS)
- 2x 10-bit PWMs
- 2x Capture, Compare, PWM (CCP)
- Complementary Waveform Generator (CWG)
- Numerically Controlled Oscillator (NCO)
- 2x Configurable Logic Controller (CLC)
- 5 Channel 10-bit ADC with Voltage Reference
- 5-bit Digital to Analog Converter (DAC)
- 1x Comparators
- 2x 8-bit Timers (TMR0/TMR2)
- 1x 16-bit Timer (TMR1)
- Windowed Watchdog Timer (WWDT)
- Enhanced Power-On/Off-Reset
- Low-Power Brown-Out Reset (LPBOR)
- Programmable Brown-Out Reset (BOR)
- In Circuit Serial Programming (ICSP)
- PIC16LF18313 (1.8V – 3.6V)
- PIC16F18313 (2.3V – 5.5V)
Description
AI
PIC16(L)F18313 microcontrollers feature Analog, Core Independent Peripherals and Communication Peripherals, combined with eXtreme Low Power (XLP) for wide range of general purpose and low-power applications. The Peripheral Pin Select (PPS) functionality enables pin mapping when using the digital peripherals (CLC, CWG, CCP, PWM and communications) to add flexibility to the application design.