ADM489 Series

5 V, Slew-Rate Limited, Low Power, 250 kbps, Full Duplex EIA RS-485 Transceiver (with DE/RE)

Catalog

5 V, Slew-Rate Limited, Low Power, 250 kbps, Full Duplex EIA RS-485 Transceiver (with DE/RE)

Part	Duplex	Data Rate	Protocol	Package / Case [x]	Package / Case [y]	Package / Case	Type	Voltage - Supply [Min]	Voltage - Supply [Max]	Mounting Type	Receiver Hysteresis	Operating Temperature [Max]	Operating Temperature [Min]	Supplier Device Package
Analog Devices ADM489ARZ-REEL7	Full	250 KBd	RS422 RS485	0.154 in	3.9 mm	14-SOIC	Transceiver	4.5 V	5.5 V	Surface Mount	70 mV	85 °C	-40 °C
Analog Devices ADM489ARZ-REEL	Full	250 KBd	RS422 RS485	0.154 in	3.9 mm	14-SOIC	Transceiver	4.5 V	5.5 V	Surface Mount	70 mV	85 °C	-40 °C
Analog Devices ADM489ARUZ-REEL7	Full	250 KBd	RS422 RS485	0.173 in	4.4 mm	16-TSSOP	Transceiver	4.5 V	5.5 V	Surface Mount	70 mV	85 °C	-40 °C	16-TSSOP
Analog Devices ADM489ARU			RS422 RS485	0.173 in	4.4 mm	16-TSSOP	Transceiver	4.5 V	5.5 V	Surface Mount				16-TSSOP

Catalog

5 V, Slew-Rate Limited, Low Power, 250 kbps, Full Duplex EIA RS-485 Transceiver (with DE/RE)

Key Features

• Meets EIA RS-485 Standard

• 250 kbps Data Rate

• Single 5 V ± 10% Supply

• –7 V to +12 V Bus Common-Mode Range

• 12 kO Input Impedance

• 2 kV EFT Protection Meets IEC1000-4-4

• High EM Immunity Meets IEC1000-4-3

• Reduced Slew Rate for Low EM Interference

• Short Circuit Protection

• Excellent Noise Immunity

• 30 µA Supply Current

Description

TheADM488and ADM489 are low power differential line transceiver suitable for communication on multipoint bus transmission lines.They are intended for balanced data transmission and comply with both EIA Standards RS-485 and RS-422. Both products contains a single differential line driver and a single differential line receiver making them suitable for full duplex data transfer.The ADM489 contains an additional receiver and driver enable control.The input impedance is 12 kΩ, allowing 32 transceivers to be connected on the bus.The ADM488 / ADM489 operates from a single +5 V ± 10% power supply. Excessive power dissipation caused by bus contention or by output shorting is prevented by a thermal shutdown circuit. This feature forces the driver output into a high impedance state if during fault conditions a significant temperature increase is detected in the internal driver circuitry.The receiver contains a fail-safe feature that results in a logic high output state if the inputs are unconnected (floating). The ADM488 / ADM489 is fabricated on BiCMOS, an advanced mixed technology process combining low power CMOS with fast switching bipolar technology.The ADM488 / ADM489 is fully specified over the industrial temperature range and is available in DIP, SOIC and TSSOP packages.