MCP14A1202 Series

12 A MOSFET Gate Driver with Low Input Threshold and Enable

Catalog

12 A MOSFET Gate Driver with Low Input Threshold and Enable

Part	Channel Type	Logic Voltage - VIL, VIH	Current - Peak Output (Source, Sink) [custom]	Current - Peak Output (Source, Sink) [custom]	Driven Configuration	Operating Temperature [Min]	Operating Temperature [Max]	Number of Drivers	Supplier Device Package	Rise / Fall Time (Typ) [custom]	Rise / Fall Time (Typ) [custom]	Mounting Type	Package / Case	Package / Case [custom]	Package / Case	Voltage - Supply [Max]	Voltage - Supply [Min]	Input Type	Package / Case [y]	Package / Case [x]	Qualification	Grade
Microchip Technology MCP14A1202-E/MS	Single	0.8 V 2 V	12 A	12 A	Low-Side	-40 °C	125 °C	1	8-MSOP	25 ns	25 ns	Surface Mount	8-MSOP 8-TSSOP	0.118 in	3 mm	18 V	4.5 V	Non-Inverting
Microchip Technology MCP14A1202-E/SN	Single	0.8 V 2 V	12 A	12 A	Low-Side	-40 °C	125 °C	1	8-SOIC	25 ns	25 ns	Surface Mount	8-SOIC			18 V	4.5 V	Non-Inverting	3.9 mm	0.154 in
Microchip Technology MCP14A1202T-E/SNVAO	Synchronous	0.8 V 2 V			Low-Side	-40 °C	125 °C	1	8-SOIC	25 ns	25 ns	Surface Mount	8-SOIC			18 V	4.5 V	Non-Inverting	3.9 mm	0.154 in	AEC-Q100	Automotive
Microchip Technology MCP14A1202T-E/MNY	Single	0.8 V 2 V	12 A	12 A	Low-Side	-40 °C	125 °C	1	8-TDFN (2x3)	25 ns	25 ns	Surface Mount	8-WFDFN Exposed Pad			18 V	4.5 V	Non-Inverting

Catalog

12 A MOSFET Gate Driver with Low Input Threshold and Enable

Key Features

- High Peak Output Current: 12 A (typical)

- Wide Operating Range: 4.5 V to 18 V

- Low Shoot-Through/Cross-Conduction Current in Output Stage

- High Capacitive Load Drive Capability: 15,000 pF in 25 ns (typical)

- Short Delay Times: 28 ns (D1)28 ns (D2) (typical)

- Low Supply Current: 360 µA (typical)

- Low Voltage Threshold Input and Enable with Hysteresis

- Latch-Up Protected: Withstands 0.5 A Reverse Current

Description

The MCP14A1201/2 devices are high-speed MOSFET drivers that are capable of providing up to 12 A of peak current while operating from a single 4.5 V to 18 V supply. There are two output configurations available; inverting (MCP14A1201) and noninverting (MCP14A1202). These devices feature low shoot-through current, fast rise and fall times, and matched propagation delays which make them ideal for high speed switching frequency applications. The MCP14A1201/2 family of devices offers enhanced control with Enable functionality. The active-high Enable pin can be driven low to drive the output of the MCP14A1201/2 low, regardless of the status of the Input pin. An integrated pull-up resistor allows the user to leave the Enable pin floating for standard operation. These devices are highly latch-up resistant under any condition within their power and voltage ratings. They can accept up to 500 mA of reverse current being forced back into their outputs without damage or logic upset. All terminals are fully protected against electrostatic discharge (ESD) up to 2 kV (HBM) and 200 V (MM).