PIC32CK1025GC01100 Series

Arm® Cortex®-M33 Based MCU with 1 MB Flash/256 KB SRAM

Catalog

Arm® Cortex®-M33 Based MCU with 1 MB Flash/256 KB SRAM

Part	Program Memory Size	Number of I/O	Operating Temperature [Max]	Operating Temperature [Min]	Package / Case	Speed	Program Memory Type	Peripherals	Connectivity	Voltage - Supply (Vcc/Vdd) [Max]	Voltage - Supply (Vcc/Vdd) [Min]	Core Size	Core Processor	Data Converters	Mounting Type	Supplier Device Package	Oscillator Type	RAM Size
Microchip Technology PIC32CK1025GC01100-I/4SB	1 MB	72	85 °C	-40 °C	100-TQFP Exposed Pad	120 MHz	FLASH	Brown-out Detect/Reset DMA I2S IR LVD LVR POR PWM Temp Sensor TRNG WDT	CANbus EBI/EMI Ethernet I2C IrDA LINbus MMC/SD/SDIO QSPI SDHC SPI UART/USART USB	3.63 V	1.71 V	32-Bit	ARM® Cortex®-M33	A/D 15x12b SAR	Surface Mount	100-TQFP (14x14)	External Internal	256 K

Catalog

Arm® Cortex®-M33 Based MCU with 1 MB Flash/256 KB SRAM

Key Features

• Arm Cortex-M33:* Clock frequencies to 120 MHz

• * Higher performance architecture (1.54 DMIPS/MHz)

• * DSP instructions

• * Faster floating-point math capabilities

•

• Memory:* 1 MB Dual Panel Flash with ECC

• * 256 KB SRAM

• * 4 KB (I+D) cache

• * 8 KB Backup Memory (Data Flash)

•

• Connectivity:* 10/100 Ethernet MAC with IEEE 1588

• * 2 CAN-FD

• * 2 USB (FS and HS)

• * 2 SDHC/SDIO

• * I2S, QSPI with XIP

• * 8 SERCOM (ISO7816)

•

• User Interface:* Peripheral Touch Controller (PTC) with Driven Shield®

• * Parallel Capture Interface-Camera (PCC)

• * 16-bit External Bus Interface (EBI) for SRAM, Flash, PSRAM, EEPROM, and LCD

•

• Analog:* 12-bit 3 Msps ADC with 12-channels

• * 2-Analog Comparators

•

• Development Support:* MPLAB X IDE

• * MPLAB Harmony v3 and MCC

• * MPLAB XC32 Compiler

• * 2-wire Serial Wire Debug (SWD) Interface

• * 4-Wire JTAG Scan/Debug Interface

• * Embedded Trace Module with instruction trace stream

Description

Arm® Cortex®-M33 Based 120 MHz MCUs with Connectivity Peripherals ----------------------------------------------------------------- --- The PIC32CK SG/GC family of microcontrollers (MCUs) is based on Arm® Cortex®-M33 technology. The M33 is optimized for power-sensitive microcontroller and mixed-signal applications. It improves performance over the previous generation, real-time determinism, energy efficiency, software productivity, and system security. The PIC32CK SG/GC family offers a large memory capacity with 2 MB of Dual Panel Flash and 512 KB of SRAM. The SG variants are intended for highly secure connectivity and applications needing the most secure key management and cryptographic operations. The SG family combines an on-chip, fully isolated Hardware Security Module (HSM) with Arm TrustZone® technology. The GC variants are intended for general-purpose mixed-signal applications that do not need the HSM and advanced security features. The PIC32CK SG/GC devices have connectivity options including standard serial communications (UART, USART, SPI, I2C, etc.,) I2S, USB, CAN FD, and 10/100 Ethernet. Advanced analog includes a 12-bit 3 Msps ADC and Peripheral Touch Controller. The PIC32CK SG/GC is fully supported by MPLAB X IDE and MPLAB® Harmony Integrated Design Environment. CAN FD and 10/100 Ethernet IEEE1588. These MCUs are available in 144-pin and 100-pin, 64-pin package options.