ATA6562 Series

High-speed CAN FD Transceiver with Standby- and Silent Mode and WUP

Catalog

High-speed CAN FD Transceiver with Standby- and Silent Mode and WUP

Part	Mounting Type	Duplex	Voltage - Supply [Min]	Voltage - Supply [Max]	Receiver Hysteresis	Grade	Data Rate	Qualification	Protocol	Operating Temperature [Min]	Operating Temperature [Max]	Type	Supplier Device Package	Package / Case	Package / Case [y]	Package / Case [x]
Microchip Technology ATA6562-GAQW1-VAO	Surface Mount	Half	4.5 V	5.5 V	120 mV	Automotive	5 MBd	AEC-Q100	CANbus	-40 °C	125 °C	Transceiver	8-SOIC	8-SOIC	3.9 mm	0.154 in
Microchip Technology ATA6562-GBQW0	Surface Mount Wettable Flank	Half	4.5 V	5.5 V	120 mV	Automotive	5 MBd	AEC-Q100	CANbus			Transceiver	8-VDFN (3x3)	8-VDFN Exposed Pad
Microchip Technology ATA6562-GAQW1	Surface Mount	Half	4.5 V	5.5 V	120 mV	Automotive	5 MBd	AEC-Q100	CANbus	-40 °C	125 °C	Transceiver	8-SOIC	8-SOIC	3.9 mm	0.154 in

Catalog

High-speed CAN FD Transceiver with Standby- and Silent Mode and WUP

Key Features

- Fully ISO 11898-2, ISO 11898-5, ISO 11898-2: 2016 and SAE J2962-2 compliant

- ISO 26262 FuSa Ready

- CAN FD - communication speed up to 5Mbit/s

- Low electromagnetic emission (EME) and high electromagnetic immunity (EMI)

- Differential receiver with wide common mode range

- Silent mode (receive only)

- Remote wake-up capability via CAN bus - Wake-Up on Pattern (WUP), as Specified in ISO 11898-2: 2016, 3.8 μs Activity Filter Time

- Functional behavior predictable under all supply conditions

- Transceiver disengages from the bus when not powered up

- RXD recessive clamping detection

- High electrostatic discharge (ESD) handling capability on the bus pins

- Bus pins protected against transients in automotive environments

- Transmit data (TXD) dominant time-out function

- Undervoltage detection on VCC

- CANH/CANL short-circuit and overtemperature protected

- AEC-Q100 and AEC-Q006 qualified

- Packages: SOIC8, VDFN8 with wettable flanks (Moisture Sensitivity Level 1)

•

• Built-in Safety Features* Power-on Reset (POR)

• * Voltage monitoring (VCC)

• * Overtemperature detection

• * RXD Recessive Clamp detection

• * TXD Dominant Timeout

Description

The Microchip ATA6562 is a high-speed CAN FD CAN transceiver that provides an interface between a controller area network (CAN) protocol controller and the physical two-wire CAN bus. The transceiver is designed for high-speed (up to 5Mbit/s) CAN applications in the automotive industry, providing differential transmit and receive capability to (a microcontroller with) a CAN protocol controller. It offers improved electromagnetic compatibility (EMC) and electrostatic discharge (ESD) performance and ideal passive behavior to the CAN bus when the supply voltage is off. Three operating modes (Standby, Normal and Silent Mode) together with the dedicated fail-safe features make the Microchip ATA6562 an excellent choice for all types of high- speed CAN networks, especially in nodes requiring low-power mode with wake-up capability via the CAN bus. The ATA6562 is automotive Grade 0 qualified for an ambient temperature range from -40° to 150°C. To purchase the ATA6562 or obtain additional information, please contact any Microchip sales representative or authorized worldwide distributor.