1N5754B-Zener-Diode Series

Zener Diode Single 2-Pin 56V, 5%, 2000Ohm, 500mW DO-35 Bag

Catalog

Zener Diode Single 2-Pin 56V, 5%, 2000Ohm, 500mW DO-35 Bag

Part	Power - Max [Max]	Package / Case	Supplier Device Package	Operating Temperature [Min]	Operating Temperature [Max]	Tolerance	Voltage - Zener (Nom) (Vz)	Current - Reverse Leakage @ Vr	Impedance (Max) (Zzt) [Max]	Mounting Type	Voltage - Forward (Vf) (Max) @ If
Microchip Technology 1N5754B	500 mW	Axial DO-204AH DO-35	DO-204AH (DO-35)	-65 ░C	347 °F	5 %	56 V	100 nA	200 Ohms	Through Hole	900 mV

Catalog

Zener Diode Single 2-Pin 56V, 5%, 2000Ohm, 500mW DO-35 Bag

Key Features

- JEDEC registered 1N5728 to 1N5757 series.

- Internal metallurgical bond option available by adding a "-1" suffix.

- Options for screening in accordance with MILPRF-19500 for JAN, JANTX, JANTXV, and JANS are available by adding MQ, , , or MSP prefixes respectively to part numbers with "-1" suffix.

- Surface Mount equivalents are also available in DO-213AA by adding a UR or UR-1 suffix, e.g. 1N5728UR, 1N5746UR-1, etc. (see separate data sheets).

- Regulates voltage over a broad operating current and temperature range.

- Extensive selection from 4.7 to 75 V.

- Standard voltage tolerances of plus/minus 5% with a B suffix.

- Tight tolerances are available in plus or minus 2% or 1% with C or D suffix respectively.

- Flexible axial-lead mounting terminals.

- Non sensitive to ESD per MIL-STD-750 Method 1020.

- Minimal capacitance (see Figure 3).

- Inherently radiation hard as described in Microchip MicroNote 050.

Description

The 1N5728 thru 1N5757 series of 0.5 watt Zener Voltage Regulators provides a selection from 4.7 to 75 volts in standard 5% tolerances as well as tighter tolerances identified by a "C" or "D" suffix letter on the part number. These glass axial-leaded DO-35 Zeners are also available with an internal-metallurgical-bond option by adding a "-1" suffix. Microchip also offers numerous other Zener products to meet higher and lower power applications.