Catalog
8 Channel, PDM to I2S/TDM Converter
Key Features
• 8 channels of PDM audio inputs from digital microphones
• 16×, 32×, or 64× decimation ratio of PDM to PCM audio data
• 24-bit resolution to support high sound pressure level (SPL) microphones
• 126 dB A-weighted SNR
• 4 kHz to 192 kHz output sampling rate
• Bit clock rates of 64×, 128×, 192×, 256×, 384×, or 512× the output sampling rate
• Dual output PDM clocks
• Automatic PDM clock generation
• Automatic power-down when BCLK removed
• Selectable I2C control or hardware mode operation
• 1.2 mA DVDD operating current for 8 channels at 48 kHz frequency sampling rate and 1.8 V supply
• Slave I2S or TDM output interface
• Up to TDM-16 supported
• Configurable TDM slot routing and sizes
• I/O supply voltage from 1.70 V to 3.63 V
• DVDD supply voltage from 1.10 V to 1.98 V
• <5 μA typical DVDD shutdown current
• 16-lead, 3 mm × 3 mm, 0.50 mm pitch LFCSP
• Power-on reset
Description
AI
The ADAU7118 converts four stereo pulse density modulation (PDM) bitstreams into one pulse code modulation (PCM) output stream. The source for the PDM data can be eight microphones or other PDM sources. The PCM audio data is output on a serial audio interface port in either inter-IC serial (I2S) or time domain multiplexed (TDM) format.The ADAU7118 is specified over the commercial temperature range (−40°C to +85°C). The ADAU7118 is available in a 16-lead, 3 mm × 3 mm, 0.40 mm pitch, lead frame chip scale package (LFCSP).Note that throughout this data sheet, multifunction pins, such as ADDR/CONFIG, are referred to either by the entire pin name or by a single function of the pin, for example, ADDR, when only that function is relevant.ApplicationsMicrophone arraysMobile computingPortable electronicsConsumer electronicsProfessional electronics
