ADP1071-1 Series

Isolated Synchronous Flyback Controller with IntegratediCoupler

Catalog

Isolated Synchronous Flyback Controller with IntegratediCoupler

Part	Voltage - Input [Max]	Voltage - Input [Min]	Supplier Device Package	Package / Case [x]	Package / Case	Package / Case [y]	Current - Supply	Operating Temperature [Max]	Operating Temperature [Min]	Applications	Mounting Type	Voltage - Supply [Min]	Voltage - Supply [Max]
Analog Devices ADP1071-1ARWZ	3 V	0.4 V	16-SOIC	0.295 in	16-SOIC	7.5 mm	16.6 mA	125 °C	-40 °C	Flyback Forward Converters	Surface Mount	4.7 V	12.5 V

Catalog

Isolated Synchronous Flyback Controller with IntegratediCoupler

Key Features

• Current mode controller for flyback topology

• ADP1071-1: programmable LLM or CCM for high VINapplications

• ADP1071-2: forced CCM operation

• Programmable slope compensation

• ntegrated 5kV Isolation (SOIC_W Package) or 3.0kV (LGA Package) Rated Dielectric Isolation Voltage with ADI’s, Patented iiCoupler technology

• Wide voltage supply rangePrimary VDD: up to 60 V (ADP1071-2 only)Secondary VDD2: up to 36 V

• Primary VDD: up to 60 V (ADP1071-2 only)

• Secondary VDD2: up to 36 V

• Integrated 1 A primary side MOSFET driver

• Integrated 1 A secondary side MOSFET drivers for synchronous rectification

• Integrated error amplifier and <1% accurate reference voltage

• Programmable frequency range: 50 kHz to 600 kHz

• Duty cycle clamp limit 85%

• Programmable soft start and soft start from precharged load

• Protection features such as short circuit, output overvoltage, and overtemperature protection

• Power saving LLM using MODE pin (ADP1071-1only)

• Cycle by cycle input overcurrent protection

• Precision enable UVLO with hysteresis

• Frequency synchronization

• Safety and regulatory approvals (pending)

• UL recognition

• CSA Component Acceptance Notice 5A

• VDE certificate of conformityCQC Certification per GB4943.1-2011

• CQC Certification per GB4943.1-2011

• Available in 16-lead SOIC_W package and 24 terminal LGA package

Description

The ADP1071-1/ADP1071-2 are pulse-width modulation (PWM) current mode fixed frequency synchronous flyback controllers designed for isolated dc-to-dc power supplies. Analog Devices proprietaryiCouplers®are integrated in the ADP1071-1/ADP1071-2 to eliminate the bulky signal trans-formers and optocouplers that transmit signals over the isolation boundary. Integrating theiCouplers reduces system design complexity, cost, and component count and improves overall system reliability. With the integrated isolators and metal-oxide semiconductor field effect transistor (MOSFET) drivers on both the primary and the secondary side, the ADP1071-1/ADP1071-2 offer a compact system level design and yield a higher efficiency than a diode rectified flyback converter at heavy loads.Output regulation is achieved by sensing the output voltage on the secondary side, where the feedback and the PWM signals are transmitted between the primary and secondary sides through theiCouplers.The ADP1071-1/ADP1071-2 are offered in a 16-lead SOIC_W package with an isolation voltage rating of 5 kV rms. The ADP1071-2 is designed for isolated dc-to-dc applications typically with an input voltage less than 36 V, and the ADP1071-1 targets high input voltage applications, in which the dc input voltage can exceed 60 V.The ADP1071-1/ADP1071-2 offer features such as input current protection, output overvoltage protection (OVP), undervoltage lockout (UVLO), precision enable with adjustable hysteresis, overtemperature protection (OTP), and power saving light load mode (LLM).ApplicationsIsolated dc-to-dc or ac-to-dc power conversionTelecom, industrialSmall cellPoE powered deviceEnterprise switches and routers