ADuM6420A Series

Quad-Channel Isolators with Integrated DC-to-DC Converter (4:0 directionality)

Catalog

Quad-Channel Isolators with Integrated DC-to-DC Converter (4:0 directionality)

Part	Inputs - Side 1/Side 2	Operating Temperature [Max]	Operating Temperature [Min]	Type	Data Rate	Mounting Type	Rise / Fall Time (Typ) [custom]	Rise / Fall Time (Typ) [custom]	Pulse Width Distortion (Max)	Common Mode Transient Immunity (Min) [Min]	Channel Type	Technology	Package / Case [custom]	Package / Case [custom]	Package / Case	Isolated Power	Voltage - Supply [Max]	Voltage - Supply [Min]	Propagation Delay tpLH / tpHL (Max)	Supplier Device Package	Number of Channels
Analog Devices ADUM6420ABRNZ3-RL	4/0	125 °C	-40 °C	General Purpose	100 Mbps	Surface Mount	2.5 ns	2.5 ns	5 ns	75 kV/çs	Unidirectional	Magnetic Coupling	7.5 mm	0.295 in	28-BSSOP		5.5 V	1.7 V	17 ns	28-SOIC-W-FP	4
Analog Devices ADUM6420ABRNZ3	4/0	125 °C	-40 °C	General Purpose	100 Mbps	Surface Mount	2.5 ns	2.5 ns	5 ns	75 kV/çs	Unidirectional	Magnetic Coupling	7.5 mm	0.295 in	28-BSSOP		5.5 V	1.7 V	17 ns	28-SOIC-W-FP	4

Catalog

Quad-Channel Isolators with Integrated DC-to-DC Converter (4:0 directionality)

Key Features

• isoPower integrated, isolated dc-to-dc converter

• 100 mA output supply

• AEC-Q100 qualified for automotive applicationsADuM6421AW

• ADuM6421AW

• Meets CISPR 32/EN55032 Class B emission limits up to 5 Mbps at a full load on a 2-layer PCB

• Quad dc to 100 Mbps signal isolation channels

• 28-lead, fine pitch, SOIC with 8.3 mm minimum creepage

• High temperature operation: 125°C maximum

• High common-mode transient immunity: 100 kV/μs

• Safety and regulatory approvals (pending)

• UL recognition 5000 V rms for 1 minute per UL 1577

• CSA certification per IEC 62368-1, IEC 61010-1, and IEC

• 60601-1

• VDE V 0884-11 certificate of conformity (pending)

• VIORM= 566 V peak

• CQC certification per GB4943.1-2011 (pending)

Description

The ADuM6420A/ADuM6421A/ADuM6422A/ADuM6423A/ADuM6424A1are quad-channel digital isolators with anisoPower®, integrated, isolated dc-to-dc converter. Based on the Analog Devices, Inc.,iCoupler®technology, the dc-to-dc converter provides regulated, isolated power that meets CISPR 32/EN 55032 Class B limits at a full load on a 2-layer printed circuit board (PCB) with ferrites. Popular voltage combinations and the associated output current levels are listed in Table 1 in the data sheet.The ADuM6420A/ADuM6421A/ADuM6422A/ADuM6423A/ADuM6424A eliminate the need for a separate, isolated dc-to-dc converter in 500 mW, isolated designs. TheiCoupler chip scale transformer technology is used for isolated logic signals and for the magnetic components of the dc-to-dc converter. The result is a small form factor, total isolation solution.The ADuM6420A/ADuM6421A/ADuM6422A/ADuM6423A/ADuM6424A isolators provide four independent isolation channels. See the Pin Configurations and Function Descriptions in the data sheet for additional information.APPLICATIONSRS-232 transceiversPower supply start-up bias and gate drivesIsolated sensor interfacesAutomotive on-board charger (OBC) and dc to dcIndustrial programmable logic controllers (PLCs)1Protected by U.S. Patents 5,952,849; 6,873,065; 6,903,578; and 7,075,329. Other patents are pending.