1N5525BUR-1-Zener-Diode Series

Zener Diode Single 2-Pin 6.2V, 5%, 30Ohm, 500mW DO-213AA Bag

Catalog

Zener Diode Single 2-Pin 6.2V, 5%, 30Ohm, 500mW DO-213AA Bag

Part	Current - Reverse Leakage @ Vr	Voltage - Zener (Nom) (Vz)	Mounting Type	Supplier Device Package	Tolerance	Package / Case	Impedance (Max) (Zzt) [Max]	Voltage - Forward (Vf) (Max) @ If	Power - Max [Max]	Operating Temperature [Max]	Operating Temperature [Min]
Microchip Technology 1N5525BUR-1	1 µA	6.2 V	Surface Mount	DO-213AA	5 %	DO-213AA	30 Ohms	1.1 V	500 mW	175 ░C	-65 °C

Catalog

Zener Diode Single 2-Pin 6.2V, 5%, 30Ohm, 500mW DO-213AA Bag

Key Features

- JEDEC registered 1N5518 thru 1N5546.

- Voltage tolerances of plus/minus 20%, 10%, 5%, 2%, and 1% available. See Note 1 on page 3.

- Internal metallurgical bond. JAN, JANTX, and JANTXV qualification per MIL-PRF-19500/437 available. RoHS compliant versions available (commercial grade only).

- Regulates voltage over a broad operating current and temperature range.

- Extensive selection from 3.3 to 33 V.

- Hermetically sealed surface mount package.

- Nonsensitive to ESD per MIL-STD-750 Method 1020.

- Minimal capacitance (see Figure 3).

- Inherently radiation hard as described in Microchip’s "MicroNote 050" which is available at Microchip.com.

Description

The 1N5518BUR-1 thru 1N5546BUR-1 series of 0.5 watt glass surface mount Zener voltage regulators provides a selection from 3.3 to 33 volts with tolerances ranging from plus/minus 1% to 20%. The standard tolerance is plus/minus 5% with the B suffix unless ordered otherwise. These glass surface mount devices are available with an internal metallurgical bond option. This type of bonded Zener package construction is also in JAN, JANTX, and JANTXV military qualifications. Microchip also offers numerous other Zener products to meet higher and lower power applications.