MCP6285 Series

450 µA, 5 MHz Rail-to-Rail Op Amp

Catalog

450 µA, 5 MHz Rail-to-Rail Op Amp

Part	Number of Circuits	Current - Input Bias	Operating Temperature [Min]	Operating Temperature [Max]	Supplier Device Package	Mounting Type	Output Type	Amplifier Type	Slew Rate	Voltage - Input Offset	Gain Bandwidth Product	Current - Supply	Voltage - Supply Span (Max) [Max]	Package / Case	Package / Case [y]	Package / Case [x]	Voltage - Supply Span (Min) [Min]	Current - Output / Channel	Package / Case [custom]	Package / Case
Microchip Technology MCP6285T-E/SN	2	1 pA	-40 °C	125 °C	8-SOIC	Surface Mount	Rail-to-Rail	General Purpose	2.5 V/çs	3 mV	5 MHz	450 µA	5.5 V	8-SOIC	3.9 mm	0.154 in	2.2 V	25 mA
Microchip Technology MCP6285-E/SN	2	1 pA	-40 °C	125 °C	8-SOIC	Surface Mount	Rail-to-Rail	General Purpose	2.5 V/çs	3 mV	5 MHz	450 µA	5.5 V	8-SOIC	3.9 mm	0.154 in	2.2 V	25 mA
Microchip Technology MCP6285T-E/MS	2	1 pA	-40 °C	125 °C	8-MSOP	Surface Mount	Rail-to-Rail	General Purpose	2.5 V/çs	3 mV	5 MHz	450 µA	5.5 V	8-MSOP 8-TSSOP			2.2 V	25 mA	0.118 in	3 mm

Catalog

450 µA, 5 MHz Rail-to-Rail Op Amp

Key Features

• * 5 MHz Gain Bandwidth Product (typ.)

• * Supply Current: IQ = 450 µA (typ.)

• * Supply Voltage: 2.2V to 6V

• * Rail-to-Rail Input/Output

• * Extended Temperature Range: -40°C to +125°C

• * Available in Single, Dual and Quad Packages

• * Single with Chip Select (CS) (MCP6283)

• * Dual with Chip Select (CS) (MCP6285)

• * Package Types: PDIP, SOIC, MSOP

Description

The Microchip Technology Inc. MCP6281/1R/2/3/4/5 family of operational amplifiers (op amps) provide wide bandwidth for the current. This family has a 5 MHz Gain Bandwidth Product (GBWP) and a 65° phase margin. This family also operates from a single supply voltage as low as 2.2V, while drawing 450 µA (typical) quiescent current. Additionally, the MCP6281/1R/2/3/4/5 supports rail-to-rail input and output swing, with a common mode input voltage range of VDD + 300mV to VSS – 300 mV. This family of operational amplifiers is designed with Microchip’s advanced CMOS process. The MCP6285 has a Chip Select (CS) input for dual op amps in an 8-pin package. This device is manufactured by cascading the two op amps (the output of op amp A connected to the non-inverting input of op amp B). The CS input puts the device in Low-power mode. The MCP6281/1R/2/3/4/5 family operates over the Extended Temperature Range of -40°C to +125°C.