1N4744AGE3-Zener-Diode Series

Zener Diode Single 2-Pin 15V, 5% Tolerance , 14.0Ohm, 1000mW DO-41 T/R

Catalog

Zener Diode Single 2-Pin 15V, 5% Tolerance , 14.0Ohm, 1000mW DO-41 T/R

Part	Tolerance	Package / Case	Impedance (Max) (Zzt) [Max]	Power - Max [Max]	Mounting Type	Voltage - Zener (Nom) (Vz)	Voltage - Forward (Vf) (Max) @ If	Supplier Device Package	Current - Reverse Leakage @ Vr	Operating Temperature [Min]	Operating Temperature [Max]
Microchip Technology 1N4744E3/TR13	10 %	Axial DO-204AL DO-41	14 Ohms	1 W	Through Hole	15 V	1.2 V	DO-204AL (DO-41)	5 µA	-65 ░C	150 °C
Microchip Technology 1N4744APE3/TR8	5 %	Axial DO-204AL DO-41	14 Ohms	1 W	Through Hole	15 V	1.2 V	DO-204AL (DO-41)	5 µA	-65 ░C	150 °C
Microchip Technology 1N4744CP/TR8	2 %	Axial DO-204AL DO-41	14 Ohms	1 W	Through Hole	15 V	1.2 V	DO-204AL (DO-41)	5 µA	-65 ░C	150 °C
Microchip Technology 1N4744APE3/TR12	5 %	Axial DO-204AL DO-41	14 Ohms	1 W	Through Hole	15 V	1.2 V	DO-204AL (DO-41)	5 µA	-65 ░C	150 °C
Microchip Technology 1N4744CPE3/TR12	2 %	Axial DO-204AL DO-41	14 Ohms	1 W	Through Hole	15 V	1.2 V	DO-204AL (DO-41)	5 µA	-65 ░C	150 °C
Microchip Technology 1N4744CP/TR12	2 %	Axial DO-204AL DO-41	14 Ohms	1 W	Through Hole	15 V	1.2 V	DO-204AL (DO-41)	5 µA	-65 ░C	150 °C
Microchip Technology 1N4744AGE3	5 %	Axial DO-204AL DO-41	14 Ohms	1 W	Through Hole	15 V	1.2 V	DO-204AL (DO-41)	5 µA	-65 ░C	347 °F
Microchip Technology 1N4744AUR	5 %	DO-213AB MELF (Glass)	14 Ohms	1 W	Surface Mount	15 V	1.2 V	DO-213AB	5 µA	-65 ░C	347 °F
Microchip Technology 1N4744CE3/TR13	2 %	Axial DO-204AL DO-41	14 Ohms	1 W	Through Hole	15 V	1.2 V	DO-204AL (DO-41)	5 µA	-65 ░C	150 °C

Catalog

Zener Diode Single 2-Pin 15V, 5% Tolerance , 14.0Ohm, 1000mW DO-41 T/R

Key Features

- Electrically similar to the JEDEC registered 1N4728 thru 1N4764 Zener series.

- Zener voltages available 3.3V to 100V.

- Standard voltage tolerances are +/- 5% with "A" suffix and 10 % with no suffix identification.

- Tight tolerances available in plus or minus 2% or 1% with C or D suffix respectively.

- Options for screening in accordance with MIL-PRF-19500 for JAN, JANTX, JANTXV, and JANS are available by adding MQ, MX, MV, or MSP prefixes respectively to part numbers.

- Surface mount equivalents also available as SMAJ4728A to SMAJ4764A and SMAJ4728A to SMAJ4764A.

- RoHS Compliant devices also available by adding e3 suffix Plastic body axial-leaded Zener equivalents are also available as 1N4728A to 1N4764A.

- Regulates voltage over a broad operating current and temperature range.

- Wide selection from 3.3 to 100V.

- Leadless package for surface mounting.

- Ideal for high density mounting.

- Nonsensitive to ESD.

- Hermetically sealed glass package.

- Specified capacitance (see Figure 2).

- Inherently radiation hard per MicroNote 050.

Description

The popular 1N4728AP thru 1N4764AP series of 1.0-watt Zener’s provides voltage regulation in a selection from 3.3 to 100 volts in 5% tolerances with other tighter tolerances also available as identified by different suffix letters in the part number. These plastic encapsulated Zener’s are moisture classified as Level 1 with no dry pack required. They are also available in various military screening levels by adding a prefix identifier as described in the Features below. These plastic molded Zener’s with a P suffix provide a lower thermal resistance compared to the glass-body (G suffix) option for these same JEDEC part numbers. Both package options are available by Microchip in RoHS Compliant devices with an "e3" suffix. Microchip also offers numerous other Zener products to meet higher and lower power and test current applications.