PIC24HJ12GP201 Series
Manufacturer: Microchip Technology
Catalog
Key Features
• Operating Range* Up to 40 MIPS operation
• * Industrial temperature range (-40°C to +85°C)
• * Extended temperature range (-40°C to +125°C)
•
• High Efficiency PIC24H core* Modified Harvard architecture
• * C compiler optimized instruction set
• * 16-bit-wide data path, 24-bit-wide instructions
• * Linear program memory addressing up to 4M instruction words
• * Linear data memory addressing up to 64 Kbytes
• * 71 base instructions, mostly one word/one cycle
• * Sixteen 16-bit general purpose registers
• * Flexible and powerful addressing modes
• * 16 x 16 multiply operations
• * 32/16 and 16/16 divide operations
• * Up to ±16-bit shifts for up to 40-bit data
•
• Interrupt Controller* 5-cycle latency
• * Up to 21 available interrupt sources
• * Up to three external interrupts
• * Seven programmable priority levels
• * Four processor exceptions
•
• Digital I/O* Peripheral Pin Select Functionality
• * Up to 21 programmable digital I/O pins
• * Wake-up/Interrupt-on-Change for up to 21 pins
• * Output pins can drive from 3.0V to 3.6V
• * Up to 5V output with open drain configurations on 5V tolerant pins
• * 4 mA sink on all I/O pins
•
• System Management* Flexible clock options: - External, crystal, resonator, internal RC, fully integrated Phase-Locked Loop (PLL) and extremely low-jitter PLL
• * Power-up Timer
• * Oscillator Start-up Timer/Stabilizer
• * Watchdog Timer with its own RC oscillator
• * Fail-Safe Clock Monitor (FSCM)
• * Reset by multiple sources
•
• Power Management* On-chip 2.5V voltage regulator
• * Switch between clock sources in real time
• * Idle, Sleep, and Doze modes with fast wake-up
•
• Timers/Capture/Compare* Timer/Counters, up to three 16-bit timers: - Can pair up to make one 32-bit timer, one timer runs as Real-Time Clock with external 32.768 kHz oscillator and programmable prescaler
• * Input Capture (up to four channels): - Capture on up, down, or both edges, 16-bit capture input functions and 4-deep FIFO on each capture
• * Output Compare (up to two channels): - Single or Dual 16-bit Compare mode, 16-bit Glitchless PWM Mode
•
• Communication Modules* 4-wire SPI with framing supports I/O interface to simple codecs, supports 8-bit and 16-bit data and all serial clock formats and sampling modes
• * I2C™ with Full Multi-Master Slave mode support, 7-bit and 10-bit addressing, bus collision detection and arbitration, integrated signal conditioning, slave address masking
• * UART with LIN bus support, IrDA® encoding and decoding in hardware, High-Speed Baud Mode, Hardware Flow Control with CTS and RTS
•
• Analog-to-Digital Converters (ADCs)* 10-bit, 1.1 Msps or 12-bit, 500 Ksps conversion
• * Two and four simultaneous samples (10-bit ADC)
• * Up to 10 input channels with auto-scanning
• * Conversion start can be manual or synchronized with one of four trigger sources
• * Conversion possible in Sleep mode
• * ±2 LSb max integral nonlinearity
• * ±1 LSb max differential nonlinearity
•
• Packaging* 18-pin PDIP/SOIC
• * 28-pin SPDIP/SOIC/QFN/SSOP
Description
AI
The PIC24H 16-bit device family employs a powerful 16-bit
architecture, ideal for applications that rely on high-speed, repetitive
computations, as well as control. The devices are pin compatible with the
dsPIC33F family of devices, and share a very high degree of compatibility with
the dsPIC30F family devices. This allows seamless migration options from/to
PIC24F, dsPIC30F and dsPIC33F devices.
