Catalog
CAN FD Transceiver with High-Voltage WAKE pin
Key Features
- High speed CAN FD transceiver Fully Compliant to ISO 11898-2, ISO 11898-5, ISO 11898-2:2016 and SAE J2962-2
- ISO 26262 FuSa Ready
- Communicaton Speed up to 5Mbps
- Low electromagnetic emission (EME) and high electromagnetic immunity (EMI)
- Remote wake-up pattern (WUP) according to ISO 11898-2:2016
- Differential bus receiver with wide common mode range
- Very low current consumption in Sleep and Standby with fully wake-up capability
- Power-down of the complete node via the INH-output (switching off external voltage regulator(s))
- Local wake-up via pin WAKE
- Wake-up source recognition
- 3.3V to 5V microcontrollers can be interfaced directly via the VIO pin
- Battery supply and CAN bus pins protected against transients according to ISO 7637
- High Electro Static Discharge (ESD) Handling Capability on the Bus Pins
- Bus pins short-circuit protected to GND and VCC
- VS operating voltage up to 28V, VS DC supply voltage up to 40V
- Fulfills the OEM Hardware Requirements for CAN Interfaces in Automotive Applications, Rev. 1.3
- AEC-Q100 and AEC-Q006 Qualified
- SOIC14 and DFN14 Package with wettable flanks
•
• Built-In Safety features* RXD recessive clamping detection
• * Power-on Reset (POR)
• * Overtemperature protection
• * Undervoltage detection on VS, VCC and VIO pins
• * Transceiver disengages from the bus in over-temperature and low power supply mode
• * Bus Dominant Clamping Detection
• * Transmit Data (TXD) Dominant Time-Out Function
• * Bus Recessive/Dominant Clamping Detection
Description
AI
The ATA6571 is a standalone high-speed CAN FD transceiver that interfaces a Controller Area Network (CAN) protocol controller and the physical two-wire CAN bus. The transceiver is designed for high-speed (up to 5 Mbit/s) CAN FD applications in the automotive industry, providing differential transmit and receive capability to (a microcontroller with) a CAN protocol controller. It offers improved Electromagnetic Compatibility (EMC) and ESD performance and very low power consumption, as well as features such as:
• Ideal passive behavior to the CAN bus when the supply voltage is off
• Direct interfacing to microcontrollers with supply voltages from 3V to 5V
• Advanced low-power management with local and remote wake-up support, available at all times, even when the internal VIO and VCC supplies are switched off
• Protection and diagnostic functions including bus line short-circuit detection and battery connection detection
To purchase the ATA6571 or obtain additional information, please contact any Microchip sales representative or authorized worldwide distributor.
Please see our MikroElektronika click Board! <https://www.mikroe.com/ata6571-click>
