PIC18F06Q41 Series

Compact, Powerful MCUs with Advanced Analog

Catalog

Compact, Powerful MCUs with Advanced Analog

Part	EEPROM Size	RAM Size	Number of I/O	Oscillator Type	Core Size	Mounting Type	Data Converters	Program Memory Type	Speed	Core Processor	Package / Case [custom]	Package / Case [custom]	Package / Case	Voltage - Supply (Vcc/Vdd) [Min]	Voltage - Supply (Vcc/Vdd) [Max]	Supplier Device Package	Connectivity	Operating Temperature [Max]	Operating Temperature [Min]	Program Memory Size	Package / Case [x]	Package / Case [y]
Microchip Technology PIC18F06Q41-I/ST	512 x 8	4K x 8	12	Internal	8-Bit	Surface Mount	A/D 11x12b D/A 2x8b	FLASH	64 MHz	PIC	0.173 "	4.4 mm	14-TSSOP	1.8 V	5.5 V	14-TSSOP	I2C LINbus SPI UART/USART	85 °C	-40 °C	64 KB
Microchip Technology PIC18F06Q41-E/SL	512 x 8	4K x 8	12	Internal	8-Bit	Surface Mount	A/D 11x12b D/A 2x8b	FLASH	64 MHz	PIC			14-SOIC	1.8 V	5.5 V		I2C LINbus SPI UART/USART	125 °C	-40 °C	64 KB	0.154 in	3.9 mm
Microchip Technology PIC18F06Q41-E/ST	512 x 8	4K x 8	12	Internal	8-Bit	Surface Mount	A/D 11x12b D/A 2x8b	FLASH	64 MHz	PIC	0.173 "	4.4 mm	14-TSSOP	1.8 V	5.5 V	14-TSSOP	I2C LINbus SPI UART/USART	125 °C	-40 °C	64 KB
Microchip Technology PIC18F06Q41-I/SL	512 x 8	4K x 8	12	Internal	8-Bit	Surface Mount	A/D 11x12b D/A 2x8b	FLASH	64 MHz	PIC			14-SOIC	1.8 V	5.5 V		I2C LINbus SPI UART/USART	85 °C	-40 °C	64 KB	0.154 in	3.9 mm

Catalog

Compact, Powerful MCUs with Advanced Analog

Key Features

• One Operational Amplifier* 5.5 MHz Gain Bandwidth

• * Programmable Gain

•

• Four Direct Memory Access (DMA) Controllers

•

• Three 16-bit dual PWMs provide six PWM outputs

•

• Vectored Interrupt (VI) Capability - Faster interrupt response time* Selectable high/low priority

• * Fixed interrupt latency of three instruction cycles

• * Programmable vector table base address

• * Backwards compatible with previous interrupt capabilities

•

• Memory Access Partition (MAP): The Program Flash Memory can be partitioned into:* Application Block

• * Boot Block

• * Storage Area Flash (SAF) Block

•

• Device Information Area (DIA) Stores:* Temperature Indicator factory calibrated data

• * Fixed Voltage Reference measurement data

• * Microchip Unique Identifier

•

• Low Power Mode Features:* Sleep: < 1μA typical @ 3V

• * Doze: CPU and Peripherals Running at Different Cycle Rates (typically CPU is lower)

• * Idle: CPU Halted While Peripherals Operate

• * Sleep: Lowest Power Consumption

•

• Peripheral Module Disable (PMD):* Selectively disable hardware module to minimize active power consumption of unused peripherals

•

• Peripheral Pin Select (PPS):* Enables pin mapping of digital I/O

•

• Analog-to-Digital Converter with Computation (ADCC):* Automated math functions on input signals such as averaging, filter calculations, oversampling and threshold comparison

• * Operates in Sleep

•

• Four internal analog channels* Hardware Capacitive Voltage Divider (CVD) Support:

• * Automates touch sampling and reduces software size and CPU usage

• * Four external inputs

•

• Two 8-Bit Digital-to-Analog Converter (DAC):* Buffered output available on two I/O pins

• * Internal connections to ADC and Comparators

•

• Two Comparators (CMP):* Four external inputs

• * Configurable output polarity

• * External output via Peripheral Pin Select

•

• Zero-Cross Detect (ZCD):* Detect when AC signal on pin crosses ground

•

• Voltage Reference:* Fixed Voltage Reference with 1.024V, 2.048V and 4.096V output levels

• * Internal connections to ADC, Comparator and DAC

•

• Three UART - One UART supports LIN/DMX/DALI* DMA compatible

• * Asynchronous UART, RS-232, RS-485 compatible

• * Programmable 1, 1.5, 2 stop bits

•

• Two SPI modules:* Configurable length bytes

• * Arbitrary length data packets

• * Transmit-without-Receive and Receive-without-transmit option

• * Transfer byte counter

• * Separate transmit and receive buffers with 2-byte FIFO and DMA capabilities

•

• One I2C module, SMBus, PMBus™ Compatible:* 7-bit and 10-bit addressing modes with address masking modes

• * Dedicated address, transmit and receive buffers and DMA capabilities

• * I2C, SMBus 2.0 and SMBus 3.0, and 1.8V input level selections

• * Multi-Master mode, including self-addressing

•

• Programming/Debugging Features:* In-Circuit Serial Programming™ (ICSP™) via Two Pins

• * In-Circuit Debug (ICD) with Three Breakpoints via Two Pins

• * Debug Integrated On-Chip

Description

[***PIC18-Q41 Product Family Overview***](https://www.microchip.com/en-us/products/microcontrollers-and-microprocessors/8-bit-mcus/pic-mcus/pic18-q41) PIC18-Q41 is a compact, high performance PIC18 product family with advanced analog peripherals for sensor and real-time control applications . The products are equipped with an on-chip operational amplifier, 12-bit ADC with Computation and two 8-bit DACs for improved data acquisition and sensor interfacing capabilities. Other key features include 16-bit PWMs, Direct Memory Access, Configurable Logic Cells and multiple communication interfaces. The PIC18-Q41 offers 14- and 20-pin products in small footprint packages to support customers in a variety of space constrained and sensor node applications. [*Code Examples*](https://mplab-discover.microchip.com/v1/itemtype/com.microchip.ide.project?s0=com.microchip.ide.project%3Adevice.content.name%3Aq41&ds0=com.microchip.portal.start.displayCharacteristics%3A1.0.3%3As0) [*Mindi Model*](https://github.com/microchip-pic-avr-examples/pic18q41-opamp-mindi-direct-connection/blob/main/schematics/Opamp_PIC18_Q41.lb) [*Analog Simulations*](https://github.com/search?q=org%3Amicrochip-pic-avr-examples+PIC18Q41+in%3Aname+extension%3Awxsch&type=repositories)