DRV8834 Series

11-V, 1.5-A, dual H-bridge or stepper motor driver with 1/32 microstep indexer

Catalog

11-V, 1.5-A, dual H-bridge or stepper motor driver with 1/32 microstep indexer

Part	Motor Type - Stepper	Supplier Device Package	Voltage - Load [Max]	Voltage - Load [Min]	Package / Case	Voltage - Supply [Min]	Voltage - Supply [Max]	Function	Technology	Mounting Type	Current - Output	Interface	Applications	Motor Type - AC, DC	Output Configuration	Operating Temperature [Max]	Operating Temperature [Min]	Package / Case
Texas Instruments DRV8834RGER	Bipolar	24-VQFN (4x4)	10.8 V	2.5 V	24-VFQFN Exposed Pad	2.5 V	10.8 V	Driver - Fully Integrated Control and Power Stage	Power MOSFET	Surface Mount	1.5 A	Logic	General Purpose	Brushed DC	Half Bridge (4)	150 °C	-40 °C
Texas Instruments DRV8834RGET	Bipolar	24-VQFN (4x4)	10.8 V	2.5 V	24-VFQFN Exposed Pad	2.5 V	10.8 V	Driver - Fully Integrated Control and Power Stage	Power MOSFET	Surface Mount	1.5 A	Logic	General Purpose	Brushed DC	Half Bridge (4)	150 °C	-40 °C
Texas Instruments DRV8834PWP	Bipolar	24-HTSSOP	10.8 V	2.5 V	24-PowerTSSOP	2.5 V	10.8 V	Driver - Fully Integrated Control and Power Stage	Power MOSFET	Surface Mount	1.5 A	Logic	General Purpose	Brushed DC	Half Bridge (4)	150 °C	-40 °C	0.173 in 4.4 mm
Texas Instruments DRV8834PWPR	Bipolar	24-HTSSOP	10.8 V	2.5 V	24-PowerTSSOP	2.5 V	10.8 V	Driver - Fully Integrated Control and Power Stage	Power MOSFET	Surface Mount	1.5 A	Logic	General Purpose	Brushed DC	Half Bridge (4)	150 °C	-40 °C	0.173 in 4.4 mm

Catalog

11-V, 1.5-A, dual H-bridge or stepper motor driver with 1/32 microstep indexer

Key Features

• Dual-H-Bridge Current-Control Motor DriverCapable of Driving Two DC Motors or OneStepper MotorTwo Control Modes:Built-In Indexer Logic With SimpleSTEP/DIRECTION Control and Up to1/32-Step MicrosteppingPHASE/ENABLE Control, With the Ability toDrive External References for > 1/32-StepMicrosteppingOutput Current 1.5-A Continuous, 2.2-A Peak perH-Bridge (at VM= 5 V, 25°C)Low RDS(ON): 305-mΩ HS + LS(at VM= 5 V, 25°C)Wide Power Supply Voltage Range:2.5 V to 10.8 VDynamic tBLANKand Mixed Decay Modes forSmooth MicrosteppingPWM Winding Current Regulation and LimitingThermally Enhanced Surface-Mount PackageDual-H-Bridge Current-Control Motor DriverCapable of Driving Two DC Motors or OneStepper MotorTwo Control Modes:Built-In Indexer Logic With SimpleSTEP/DIRECTION Control and Up to1/32-Step MicrosteppingPHASE/ENABLE Control, With the Ability toDrive External References for > 1/32-StepMicrosteppingOutput Current 1.5-A Continuous, 2.2-A Peak perH-Bridge (at VM= 5 V, 25°C)Low RDS(ON): 305-mΩ HS + LS(at VM= 5 V, 25°C)Wide Power Supply Voltage Range:2.5 V to 10.8 VDynamic tBLANKand Mixed Decay Modes forSmooth MicrosteppingPWM Winding Current Regulation and LimitingThermally Enhanced Surface-Mount Package

Description

The DRV8834 provides a flexible motor driver solution for toys, printers, cameras, and other mechatronic applications. The device has two H-bridge drivers, and is intended to drive a bipolar stepper motor or two DC motors. The output driver block of each H-bridge consists of N-channel power MOSFETs configured as an H-bridge to drive the motor windings. Each H-bridge includes circuitry to regulate or limit the winding current. With proper PCB design, each H-bridge of the DRV8834 can driving up to 1.5-A RMS (or DC) continuously, at 25°C with a VMsupply of 5 V. The device can support peak currents of up to 2.2 A per bridge. Current capability is reduced slightly at lower VMvoltages. Internal shutdown functions with a fault output pin are provided for overcurrent protection, short-circuit protection, undervoltage lockout and overtemperature. A low-power sleep mode is also provided. The DRV8834 is packaged in a 24-pin HTSSOP or VQFN package with PowerPAD™ (Eco-friendly: RoHS & no Sb/Br). The DRV8834 provides a flexible motor driver solution for toys, printers, cameras, and other mechatronic applications. The device has two H-bridge drivers, and is intended to drive a bipolar stepper motor or two DC motors. The output driver block of each H-bridge consists of N-channel power MOSFETs configured as an H-bridge to drive the motor windings. Each H-bridge includes circuitry to regulate or limit the winding current. With proper PCB design, each H-bridge of the DRV8834 can driving up to 1.5-A RMS (or DC) continuously, at 25°C with a VMsupply of 5 V. The device can support peak currents of up to 2.2 A per bridge. Current capability is reduced slightly at lower VMvoltages. Internal shutdown functions with a fault output pin are provided for overcurrent protection, short-circuit protection, undervoltage lockout and overtemperature. A low-power sleep mode is also provided. The DRV8834 is packaged in a 24-pin HTSSOP or VQFN package with PowerPAD™ (Eco-friendly: RoHS & no Sb/Br).