ADMV1128A Series
24 GHz to 29.5 GHz, 5G, Microwave Upconverter and Downconverter
Manufacturer: Analog Devices
Catalog
24 GHz to 29.5 GHz, 5G, Microwave Upconverter and Downconverter
Key Features
• Integration of an upconverter (a transmitter), a downconverter (a receiver), and a LO chain with options of a 2× or 4× multiplier in one chip
• RF frequency range: 24 GHz to 29.5 GHz
• LO input frequency range: 8 GHz to 15 GHz for x2 mode, 5 GHz to 7.5 GHz for x4 mode
• 2 operation modes for both upconverter and downconverterDirect conversion of differential baseband I/Q (basebandmode)Complex IF operation with optional on-chip hybrid (IF mode)
• Direct conversion of differential baseband I/Q (basebandmode)
• Complex IF operation with optional on-chip hybrid (IF mode)
• Programmable baseband output common-mode voltage from 0.7 V to 1.5 V in receive mode, set via either SPI or physical pin
• Programmable mixer gate voltage to accommodate baseband input common-mode from 0 V to 1.5 V in transmit mode
• Matched, 50 Ω impedance, single-ended RF input and output, and RF switch port
• Matched, 50 Ω impedance single-ended LO input
• Low phase variation vs. gain control
• Upconversion modeSideband rejection and carrier feedthrough optimizationEnvelope detector for LO feedthrough calibration
• Sideband rejection and carrier feedthrough optimization
• Envelope detector for LO feedthrough calibration
• Downconversion modeImage rejection and I/Q imbalance optimizationBaseband I/Q dc offset correctionReceiver mixer power detector for receiver gain setting
• Image rejection and I/Q imbalance optimization
• Baseband I/Q dc offset correction
• Receiver mixer power detector for receiver gain setting
• LO chain featuresVariable gain to accommodate the various LO drive strength values360° phase control shifter for LO synchronizationProgrammable LO harmonic reject filterI/Q phase correction
• Variable gain to accommodate the various LO drive strength values
• 360° phase control shifter for LO synchronization
• Programmable LO harmonic reject filter
• I/Q phase correction
• Fast TDD switching time via external pins
• Calibration probes for array calibration
• Programmable via a 3-wire or 4-wire SPI, compatible withADMV4828interface
• 6 mm × 6.5 mm, BGA package (see the Outline Dimensions
• section)
Description
AI
The ADMV1128A is a silicon on isolator (SOI), microwave, upconverter and downconverter optimized for 5G radio designs operating in the 24 GHz to 29.5 GHz frequency range.Both upconverters and downconverters offer two modes of frequency translation. One mode is conversion from and/or to single-ended or complex intermediate frequency (IF) signals, which then pass through an on-chip 90° IF hybrid, known as IF mode.The other mode is a direct conversion from and/or to differential baseband inphase/quadrature (I/Q) inputs and outputs, known as baseband mode. The I/Q baseband output common-mode voltage is programmable between 0 V and 1.5 V. The SPI provides fine adjustment of the quadrature phase to optimize I/Q demodulation performance.When the device is used as an image rejecting downconverter, the unwanted image term is typically rejected to 24 dBc, before calibration. The ADMV1128A offers a square law power detector to allow monitoring of the power levels at the mixer inputs of the downconverter.The RF receive input, RF transmit output, and local oscillator (LO) interface are all single-ended and matched to 50 Ω. The on-chip RF switch provides the option to combine the transmit and receive RF ports together for time division duplex (TDD) applications.The serial port interface (SPI) provides adjustment of the quadrature phase to allow optimum sideband rejection. In addition, the SPI allows powering down the output envelope detector to reduce power consumption when carrier feedthrough optimization is not necessary.The ADMV1128A upconverter and downconverter is housed in a compact, thermally enhanced, 6 mm × 6.5 mm, ball grid array (BGA) package. This BGA package enables the ability to heat sink the ADMV1128A from the top of the package for the most efficient thermal heat sinking. The ADMV1128A operates over the −40°C to +95°C TCrange.ApplicationsMillimeter-wave 5G applicationsPoint to point microwave radiosRadar and electronic warfare systemsInstrumentation and automatic test equipment (ATE)