AD7997 Series

8-Channel, 10-Bit ADC with I2C Compatible Interface in 20-Lead TSSOP

Catalog

8-Channel, 10-Bit ADC with I2C Compatible Interface in 20-Lead TSSOP

Part	Number of A/D Converters	Package / Case [y]	Package / Case	Package / Case [x]	Voltage - Supply, Analog [Min]	Voltage - Supply, Analog [Max]	Sampling Rate (Per Second)	Reference Type	Voltage - Supply, Digital [Max]	Voltage - Supply, Digital [Min]	Operating Temperature [Max]	Operating Temperature [Min]	Number of Inputs	Configuration	Mounting Type	Architecture	Input Type	Data Interface	Supplier Device Package	Ratio - S/H:ADC	Number of Bits [custom]
Analog Devices AD7997BRUZ-0REEL	1	4.4 mm	20-TSSOP	0.173 in	2.7 V	5.5 V	188 k per second	External	5.5 V	2.7 V	85 °C	-40 °C	8	MUX-S/H-ADC	Surface Mount	SAR	Single Ended	I2C	20-TSSOP	1:1	10
Analog Devices AD7997BRU-0REEL	1	4.4 mm	20-TSSOP	0.173 in	2.7 V	5.5 V	188 k per second	External	5.5 V	2.7 V	85 °C	-40 °C	8	MUX-S/H-ADC	Surface Mount	SAR	Single Ended	I2C	20-TSSOP	1:1	10
Analog Devices AD7997BRUZ-1REEL	1	4.4 mm	20-TSSOP	0.173 in	2.7 V	5.5 V	188 k per second	External	5.5 V	2.7 V	85 °C	-40 °C	8	MUX-S/H-ADC	Surface Mount	SAR	Single Ended	I2C	20-TSSOP	1:1	10

Catalog

8-Channel, 10-Bit ADC with I2C Compatible Interface in 20-Lead TSSOP

Key Features

• 10-Bit ADC with Fast Conversion Time: 2 µs

• Eight Single-Ended Analog Input Channels

• Specified for VDDof 2.7 V to 5.5 V

• Low Power Consumption

• Fast Throughput Rate: up to 188 kSPS

• Sequencer Operation

• Automatic Cycle Mode

• I2C®Compatible Serial Interface

• I2C®Interface supports:Standard, Fast, and High-Speed Modes

• Out of Range Indicator

• Pin-Selectable Addressing via AS

• Automatic Shutdown Mode: 1 µA max

Description

The AD7997 /AD7998are 8-channel, 10- and 12-bit, low power, successive approximation ADCs with an I2C-compatible interface. The parts operate from a single 2.7 V to 5.5 V power supply and feature a 2 µs conversion time. The parts contain an 8-channel multiplexer and track-and-hold amplifier that can handle input frequencies up to 11 MHz.The AD7997 / AD7998 provide a 2-wire serial interface that is compatible with I2C interfaces. Each part comes in two versions, AD7997-0 / AD7998-0 and AD7997-1 / AD7998-1, and each version allows at least two different I2C addresses. The I2C interface on the AD7997-0 / AD7998-0 supports standard and fast I2C interface modes. The I2C interface on the AD7997-1 / AD7998-1 supports standard, fast, and high speed I2C interface modes.The AD7997 / AD7998 normally remain in a shutdown state while not converting, and power up only for conversions. The conversion process can be controlled using theCONVSTpin, by a command mode where conversions occur across I2C write operations or an automatic conversion interval mode selected through software control.The AD7997 / AD7998 require an external reference that should be applied to the REFINpin and can be in the range of 1.2 V to VDD. This allows the widest dynamic input range to the ADC.On-chip limit registers can be programmed with high and low limits for the conversion result, and an open-drain, out-of-range indicator output (ALERT) becomes active when the programmed high or low limits are violated by the conversion result. This output can be used as an interrupt.PRODUCT HIGHLIGHTS2 µs conversion time with low power consumption.I2C-compatible serial interface with pin-selectable addresses. Two AD7997 / AD7998 versions allow five AD7997 / AD7998 devices to be connected to the same serial bus.The parts feature automatic shutdown while not converting to maximize power efficiency. Current consumption is 1 µA max when in shutdown mode at 3V.Reference can be driven up to the power supply.Out-of-range indicator that can be software disabled or enabled.One-shot and automatic conversion rates.Registers store minimum and maximum conversion results.