ATSAMDA1J15B Series

Catalog

ARM MCU, SAM 32 FAMILY SAM D SERIES MICROCONTROLLERS, ARM CORTEX-M0+, 32 BIT, 48 MHZ, 64 KB

Part	Oscillator Type	Operating Temperature [Max]	Operating Temperature [Min]	Speed	Package / Case	Mounting Type	Voltage - Supply (Vcc/Vdd) [Max]	Voltage - Supply (Vcc/Vdd) [Min]	Core Size	Number of I/O	RAM Size	Connectivity	Supplier Device Package	Core Processor	Program Memory Size	Data Converters	Program Memory Type	Peripherals	RAM Size	Contents	Type	Interconnect System	Utilized IC / Part	Platform	Suggested Programming Environment	Board Type	Data Converters [custom]	Data Converters [custom]
Microchip Technology ATSAMDA1E16B-MBT	Internal	105 °C	-40 °C	48 MHz	32-VFQFN Exposed Pad	Surface Mount Wettable Flank	3.63 V	2.7 V	32-Bit Single-Core	26 I/O	8 K	I2C SCI SPI UART/USART USB	32-VQFN (5x5)	ARM® Cortex®-M0+	64 KB	A/D 10x12b D/A 1x10b	FLASH	Brown-out Detect/Reset DMA I2S POR PWM WDT
Microchip Technology ATSAMDA1E15B-ABT	Internal	105 °C	-40 °C	48 MHz	32-TQFP	Surface Mount	3.63 V	2.7 V	32-Bit Single-Core	26 I/O		I2C SCI SPI UART/USART USB	32-TQFP (7x7)	ARM® Cortex®-M0+	32 KB	A/D 10x12b D/A 1x10b	FLASH	Brown-out Detect/Reset DMA I2S POR PWM WDT	4K x 8
Microchip Technology ATSAMDA1J16B-ABT	Internal	105 °C	-40 °C	48 MHz	64-TQFP	Surface Mount	3.63 V	2.7 V	32-Bit Single-Core	52	8 K	I2C SCI SPI UART/USART USB	64-TQFP (10x10)	ARM® Cortex®-M0+	64 KB	A/D 16x12b D/A 1x10b	FLASH	Brown-out Detect/Reset DMA I2S POR PWM WDT
Microchip Technology ATSAMDA1J15B-ABT	Internal	105 °C	-40 °C	48 MHz	64-TQFP	Surface Mount	3.63 V	2.7 V	32-Bit Single-Core	52		I2C SCI SPI UART/USART USB	64-TQFP (10x10)	ARM® Cortex®-M0+	32 KB	A/D 16x12b D/A 1x10b	FLASH	Brown-out Detect/Reset DMA I2S POR PWM WDT	4K x 8
Microchip Technology ATSAMDA1-XPRO						Fixed								ARM® Cortex®-M0+						Board(s)	MCU 32-Bit	Xplained Pro	ATSAMDA1	SAM DA1 Xplained Pro	Atmel Studio	Evaluation Platform
Microchip Technology ATSAMDA1G16B-MBT	Internal	105 °C	-40 °C	48 MHz	48-VFQFN Exposed Pad	Surface Mount	3.63 V	2.7 V	32-Bit Single-Core		8 K	I2C SCI SPI UART/USART USB	48-QFN (7x7)	ARM® Cortex®-M0+	64 KB		FLASH	Brown-out Detect/Reset DMA I2S POR PWM WDT									1 14	10 12
Microchip Technology ATSAMDA1G15B-MBT	Internal	105 °C	-40 °C	48 MHz	48-VFQFN Exposed Pad	Surface Mount	3.63 V	2.7 V	32-Bit Single-Core			I2C SCI SPI UART/USART USB	48-QFN (7x7)	ARM® Cortex®-M0+	32 KB		FLASH	Brown-out Detect/Reset DMA I2S POR PWM WDT	4K x 8								1 14	10 12
Microchip Technology ATSAMDA1G15B-ABT	Internal	105 °C	-40 °C	48 MHz	48-TQFP	Surface Mount	3.63 V	2.7 V	32-Bit Single-Core			I2C SCI SPI UART/USART USB	48-TQFP (7x7)	ARM® Cortex®-M0+	32 KB		FLASH	Brown-out Detect/Reset DMA I2S POR PWM WDT	4K x 8								1 14	10 12
Microchip Technology ATSAMDA1E14B-MBT	Internal	105 °C	-40 °C	48 MHz	32-VFQFN Exposed Pad	Surface Mount Wettable Flank	3.63 V	2.7 V	32-Bit Single-Core	26 I/O		I2C SCI SPI UART/USART USB	32-VQFN (5x5)	ARM® Cortex®-M0+	16 KB	A/D 10x12b D/A 1x10b	FLASH	Brown-out Detect/Reset DMA I2S POR PWM WDT	4K x 8
Microchip Technology ATSAMDA1G14B-MBT	Internal	105 °C	-40 °C	48 MHz	48-VFQFN Exposed Pad	Surface Mount	3.63 V	2.7 V	32-Bit Single-Core			I2C SCI SPI UART/USART USB	48-QFN (7x7)	ARM® Cortex®-M0+	16 KB		FLASH	Brown-out Detect/Reset DMA I2S POR PWM WDT	4K x 8								1 14	10 12

Catalog

Key Features

• * ARM Cortex-M0+ CPU running at up to 48MHz

• * Single-cycle hardware multiplier

• * Micro trace buffer

• * 16KB in-system self-programmable Flash

• * 0.5KB Read-While-Write (RWW) Flash section

• * 4KB SRAM memory

• * Power-on reset (POR) and brown-out detection (BOD)

• * Internal and external clock options with 48MHdigital frequency locked loop (DFLL48M) and 48MHto 96MHz

• * fractional digital phase locked loop (FDPLL96M)

• * External interrupt controller (EIC)

• * 16 external interrupts

• * One non-maskable interrupt

• * Two-pin serial wire debug (SWD) programming, test and debugging interface

• * Idle and standby sleep modes

• * SleepWalking peripherals

• * 8-channel direct memory access controller (DMAC)

• * 12-channel event system

• * One 16-bit TC with compare/capture channels

• * One 8-bit TC with compare/capture channels

• * One 32-bit TC with compare/capture channels, by using two TCs

• * Up to four compare channels with optional complementary output

• * Generation of synchronized pulse width modulation (PWM) pattern across port pins

• * Deterministic fault protection, fast decay and configurable dead-time between complementary output

• * Dithering for enhancing resolution with up to 5-bit and reduce quantization error

• * 32-bit real time counter (RTC) with clock/calendar function

• * Watchdog timer (WDT)

• * CRC-32 generator

• * Device 2.0 and reduced-host low speed and full speed

• * Flexible end-point configuration and management with dedicated DMA channels

• * On-chip transceivers including pull-ups and serial resistors

• * Crystal-less operation in device mode

• * USART with full-duplex and single-wire half-duplex configuration

• * I2C up to 3.4MHz

• * SPI

• * LIN Client

• * One two-channel inter-IC sound (I2S) interface

• * Differential and single-ended input

• * 1/2x to 16x programmable gain stage

• * Automatic offset and gain error compensation

• * Oversampling and decimation in hardware to support 13-, 14-, 15- or 16-bit resolution

• * 10-bit, 350ksps digital-to-analog converter (DAC)

• * Two analog comparators (AC) with window compare function

• * Up to 256-channel capacitive touch and proximity sensing

• * 26 GPIO pins

• Packages

• * 32-pin TQFP, QFN

• * 2.7V to 3.63V

• Temperature range

• * –40 to +105°C

Description

The SAM DA1 ARM® Cortex®-M0+ -based microcontrollers are operating at 48MHz (45DMIPS). The ATSAMDA1E16B provides 64KB Flash, 8kB SRAM and 2KB RWW Flash. The peripheral set for connectivity consists of 4 serial communication modules (SERCOM) that each can be configured to act as a USART, UART, SPI and I2C. Additional connectivity options are provided by the on-chip one channel Inter-IC sound interface (I2S) and the full-speed USB 2.0 embedded host and device. Supported by MPLAB X IDE and [MPLAB Harmony](https://www.microchip.com/en-us/tools-resources/configure/mplab-harmony). **Functional Safety** This device supports the ISO 26262 (ASIL B) functional safety standard. · The Functional Safety Manual, FMEDA and information on the Diagnostic Software are available under NDA through the request form on the [32-bit Microcontrollers Functional Safety](https://www.microchip.com/en-us/products/microcontrollers-and-microprocessors/32-bit-mcus/32-bit-functional-safety) web page. · Learn more about [32-bit MCUs with Functional Safety](https://www.microchip.com/en-us/products/microcontrollers-and-microprocessors/32-bit-mcus/32-bit-functional-safety)capabilities including device hardware and certified software libraries.