Catalog
TUPP-9953 10G SONET/SDH Payload Processor
Key Features
• * Configurable, multi-channel payload processor for aligning SONET virtual tributaries (VTs) or SDH tributary units (TUs) in an STS-192/STM-64 or STS-48/STM-16 data stream
• * Supports High Order (STS/AU) pointer processing, payload processing, and path termination/monitoring
• * Supports Low Order (VT/TU) pointer processing, payload processing, and path monitoring
• * On the line side, provides working Serial Receive and Transmit ESSI (Extended SONET Serial Interface) CML links. Links are configurable as:
•
• + 4xSTS-48/STM-16 2488.32 Mbit/s SONET/SDH framed interfaces; or
• + 4xSTS-12/STM-4 622.08 Mbit/s SONET/SDH framed interfaces
•
• * On the system side, provides working Add and Drop Serial ESSI links. Links are configurable as:
•
• + 4xSTS-48/STM-16 2488.32 Mbit/s SONET/SDH framed interfaces; or
• + 4xSTS-12/STM-4 622.08 Mbit/s SONET/SDH framed interfaces
•
• * Independently configurable (2488.32 Mbit/s or 622.08 Mbit/s) Line and System Interfaces
• * Provides a set of Ingress and Egress shared protection links
• * Provides a per-link Space switch on egress interfaces
• * Provides hardware based Message Assisted Protection Switching (MAPS) support to work with a centralized fabric (e.g., PM5370 WSE-40)
• * Supports independent Line Receive and System Drop transport frame alignment for high-order traffic
• * Supports independent transport, high-order payload and tributary multi-frame alignments for low-order traffic
• * Supports independent Line Transmit and System Add transport frame alignments
• * On the receive path, provides optional SDH payload conversion of:
•
• + AU4/VC4/TUG3/TU3/VC3/C3 to AU3/VC3/C3; or
• + AU3/VC3/C3 to AU4/VC4/TUG3/TU3/VC3/C3; or
• + AU4/VC4/TUG3/TUG2 to AU3/VC3/TUG2; or
• + AU3/VC3/TUG2 to AU4/VC4/TUG3/TUG2
•
• * On the transmit path, provides optional SDH payload conversion of:
•
• + AU3/VC3/C3 to AU4/VC4/TUG3/TU3/VC3/C3; or
• + AU4/VC4/TUG3/TUG2 to AU3/VC3/TUG2; or
• + AU3/VC3/TUG2 to AU4/VC4/TUG3/TUG2
•
• * Allows for low order (VT/TU) processing bypass
• * Supports high-order ESSI transport overhead transparency
• * Supports line and system diagnostic and facility loopbacks
• * Provides optional PRBS generation and monitoring features for ESSI offline link verification
• * Provides a generic 16-bit microprocessor bus interface for configuration, control, and status monitoring
• * Provides a standard 5-signal IEEE 1149.1 JTAG test port for boundary scan test purposes
• * Implemented in a 1.2 V core and 2.5 V I/O 0.13ìm CMOS technology. Inputs are 3.3 V tolerant
• * Packaged in a 672-ball FCBGA
• * Top-hat, 27 mm x 27 mm
• * Power when full bandwidth is used (OC-192/STM-64 applications using 2.488 Mbit/s links) is 6.91 W typical
• * Power when 1/4 bandwidth is used (OC-48/STM-16 applications using 622 Mbit/s links) is 2.64 W typical
Description
AI
The PM5369 TUPP-9953 is a 10G configurable SONET/SDH multi-channel payload processor for aligning SONET virtual tributaries (VTs) or SDH tributary units (TUs) in an STS-192/STM-64 or STS-48/STM-16 data stream.
**Applications**
• SONET/SDH Add-Drop Multiplexer (ADM)
• SONET/SDH Digital Cross-connect (DCC)
• Multi-service Provisioning Platforms (MSPP)
• Multi-service ADM (MS-ADM)
• Multi-Service Switch
• Optical Access Mux
• Terminal Multiplexers