Catalog
Six Degrees of Freedom Inertial Sensor
Key Features
• Triaxis digital gyroscope with digital range scaling±75°/sec, ±150°/sec, ±300°/sec settingsTight orthogonal alignment: <0.05°
• ±75°/sec, ±150°/sec, ±300°/sec settings
• Tight orthogonal alignment: <0.05°
• Triaxis digital accelerometer: ±1.7g
• Wide sensor bandwidth: 330 Hz
• Autonomous operation and data collectionNo external configuration commands requiredStart-up time: 180 msSleep mode recovery time: 4 ms
• No external configuration commands required
• Start-up time: 180 ms
• Sleep mode recovery time: 4 ms
• Factory-calibrated sensitivity, bias, and axial alignmentCalibration temperature range: −20°C to +70°C
• Calibration temperature range: −20°C to +70°C
• SPI-compatible serial interface
• Embedded temperature sensor
• Programmable operation and controlAutomatic and manual bias correction controlsBartlett window FIR filter length, number of tapsDigital I/O: data ready, alarm indicator, general-purposeAlarms for condition monitoringSleep mode for power managementDAC output voltageEnable external sample clock input: up to 1.2 kHzSingle-command self-test
• Automatic and manual bias correction controls
• Bartlett window FIR filter length, number of taps
• Digital I/O: data ready, alarm indicator, general-purpose
• Alarms for condition monitoring
• Sleep mode for power management
• DAC output voltage
• Enable external sample clock input: up to 1.2 kHz
• Single-command self-test
• Single-supply operation: 4.75 V to 5.25 V
• 2000gshock survivability
• Operating temperature range: −40°C to +105°C
Description
AI
The ADIS16362iSensor®is a complete inertial system that includes a triaxis gyroscope and triaxis accelerometer. Each sensor in the ADIS16362 combines industry-leadingiMEMS®technology with signal conditioning that optimizes dynamic performance. The factory calibration characterizes each sensor for sensitivity, bias, alignment, and linear acceleration (gyro bias). As a result, each sensor has its own dynamic compensation formulas that provide accurate sensor measurements over a temperature range of −20°C to +70°C.The ADIS16362 provides a simple, cost-effective method for integrating accurate, multiaxis, inertial sensing into industrial systems, especially when compared with the complexity and investment associated with discrete designs. All necessary motion testing and calibration are part of the production process at the factory, greatly reducing system integration time. Tight orthogonal alignment simplifies inertial frame alignment in navigation systems. An improved SPI interface and register structure provide faster data collection and configuration control. The ADIS16362 uses a compatible pinout and the same package as the ADIS1635x family. Therefore, systems that currently use the ADIS1635x family can upgrade their performance with minor firmware adjustments in their processor designs.This compact module is approximately 23 mm × 23 mm × 23 mm and provides a flexible connector interface that enables multiple mounting orientation options.APPLICATIONSMedical instrumentationRoboticsPlatform controlNavigation
