AT90PWM81 Series

Catalog

IC MCU 8BIT 8KB FLASH 32VQFN

Part	Oscillator Type	Core Processor	Program Memory Type	Package / Case	Core Size	Operating Temperature [Max]	Operating Temperature [Min]	Number of I/O	Mounting Type	Speed	Supplier Device Package	Data Converters [custom]	Data Converters [custom]	Voltage - Supply (Vcc/Vdd) [Min]	Voltage - Supply (Vcc/Vdd) [Max]	EEPROM Size	Connectivity	RAM Size	Peripherals	Data Converters [custom]	Package / Case [y]	Package / Case [y]
Microchip Technology AT90PWM81-16MN	Internal	AVR	FLASH	32-VFQFN Exposed Pad	8-Bit	105 °C	-40 °C	20	Surface Mount	16 MHz	32-VQFN (5x5)	10 b 10 b	1 11	2.7 V	5.5 V	512 x 8	SPI	256 x 8	Brown-out Detect/Reset PWM WDT
Microchip Technology AT90PWM81-16MF	Internal	AVR	FLASH	32-VFQFN Exposed Pad	8-Bit	105 °C	-40 °C	20	Surface Mount	16 MHz	32-VQFN (5x5)	10 b 10 b	1 11	2.7 V	5.5 V	512 x 8	SPI	256 x 8	Brown-out Detect/Reset PWM WDT
Microchip Technology AT90PWM81EP-16MN
Microchip Technology AT90PWM81-16SF	Internal	AVR	FLASH	20-SOIC	8-Bit	105 °C	-40 °C	16	Surface Mount	16 MHz	20-SOIC		1 8	2.7 V	5.5 V	512 x 8	SPI	256 x 8	Brown-out Detect/Reset PWM WDT	10 10	0.295 in	7.5 mm

Catalog

Key Features

• * 131 powerful instructions - most single clock cycle execution

• * 32 × 8 general purpose working registers

• * Fully static operation

• * Up to 1 MIPS throughput per MHz

• * On-chip 2-cycle multiplier

• * Endurance: 10,000 write/erase cycles

• * Lock bits protection

• * Optional 2/4Kbytes boot code section with independent lock bits

• * In-system programming by on-chip boot program

• * True read-while-write operation

• * Four bytes page size

• * 256 Bytes Internal SRAM

• * On-chip debug support (debugWIRE)

• * Non overlapping inverted PWM output pins with flexible dead-time

• * Variable PWM duty cycle and frequency

• * Synchronous update of all PWM registers

• * Enhanced resolution mode (16 bits)

• * Additional register for ADC synchronization

• * Input capture

• * Four output pins and output matrix

• * Auto-stop function for event driven PFC implementation

• * Non overlapping inverted PWM output pins with flexible dead-time

• * Variable PWM duty cycle and frequency

• * Synchronous update of all PWM registers

• * Enhanced resolution mode (16 bits)

• * Input capture

• * One 16-bit simple general purpose timer/counter

• * Up to 11 single ended channels and one fully differential ADC channel pair

• * Programmable gain (5×, 10×, 20×, 40× on differential channel)

• * Internal reference voltage

• * One 10-bit DAC

• * Resistor-array to adjust comparison voltage

• * DAC to adjust comparison voltage

• * One SPI

• * Three external interrupts

• * Programmable watchdog timer with separate on-chip oscillator

• * Low power idle, noise reduction, and power down modes

• * Power-on reset and programmable brown-out detection

• * Flag array in bit-programmable I/O space (three bytes)

• * In-system programmable via SPI port

• * Internal low power calibrated RC oscillator (8MHz or 1MHz, low jitter)

• * On chip PLL for fast PWM (32MHz, 48MHz, 64MHz) and CPU (12MHz, 16MHz); PLL source RC & XTAL

• * Dynamic clock switch

• * Temperature sensor

• * Operating voltage: 2.7V - 5.5V

• * -40°C to +105°C or -40°C to +125°C

• * 5V: 16MHz core, 64MHz PLL

• * 3.3V: 12MHz core, 48MHz PLL

Description

Specially designed for lamp ballast and motor control applications, this high-performance Microchip 8-bit AVR® RISC-based microcontroller combines 8KB ISP flash memory, 10-channel advanced PWM, 11-channel 10-bit A/D converter, one 10-bit D/A converter, one 12-bit high speed power stage controller (with extended PSC2 features) with 16-bit Resolution Enhancement. The device operates between 2.7-5.5 volts.