ADP2311 Series

Dual 1 A, 18 V, Synchronous Step-Down Regulator with Fail-Safe Voltage Monitoring

Catalog

Dual 1 A, 18 V, Synchronous Step-Down Regulator with Fail-Safe Voltage Monitoring

Part	Number of Outputs	Function	Frequency - Switching	Voltage - Output (Min/Fixed)	Output Type	Synchronous Rectifier	Topology	Operating Temperature [Min]	Operating Temperature [Max]	Output Configuration	Voltage - Input (Min) [Min]	Package / Case	Mounting Type	Voltage - Input (Max) [Max]	Voltage - Output (Max) [Max]	Supplier Device Package	Current - Output
Analog Devices ADP2311ACPZ-3-R7	2	Step-Down	300 kHz	0.6 V	Adjustable		Buck	-40 °C	125 ¯C	Positive	4.5 V	24-WFQFN Exposed Pad CSP	Surface Mount	18 V	18 V	24-LFCSP (4x4)	1 A

Catalog

Dual 1 A, 18 V, Synchronous Step-Down Regulator with Fail-Safe Voltage Monitoring

Key Features

• Input voltage: 4.5 V to 18 V

• ±1.0% output accuracy

• Integrated MOSFET: 110 mΩ/60 mΩ typical

• Continuous output current: 1 A/1 A

• Power fail comparator generates warning

• Power-on reset with programmable delay timer

• Adjustable voltage monitor for power-down (Channel 2)

• Watchdog refresh input

• Dual phase with 180° out-of-phase operation

• Fixed switching frequency: 300 kHz

• Internal compensation and soft start

• Stable with low ESR output ceramic capacitors

• Precision enable input

• Power feedback during power-off

• UVLO, OCP, OVP, and thermal shutdown protection

Description

The ADP2311 is a fully integrated, dual output, synchronous step-down dc-to-dc regulator. The regulator operates from input voltages of 4.5 V to 18 V, and the output can regulate down to 0.6 V. Each channel can provide up to 1 A of continuous output current.The ADP2311 integrates the high-side and low-side MOSFETs to provide a very high efficiency, compact solution. Both channels of the regulator run at 180° out of phase to reduce the input ripple current and the input capacitor size, thereby helping to lower system electromagnetic interference (EMI). The ADP2311 also integrates internal compensation and soft start circuitry to simplify the design.An on-chip watchdog timer can reset the microprocessor if it fails to strobe within a preset timeout period. Accurate voltage monitoring circuitry and a power fail comparator provide a controlled power-up and power-down sequence to enhance system reliability.The ADP2311 also includes undervoltage lockout (UVLO), overvoltage protection (OVP), overcurrent protection (OCP), and thermal shutdown (TSD).The ADP2311 operates over the −40°C to +125°C junction temperature range and is available in a 24-lead LFCSP package.ApplicationsIndustrial and instrumentationHealthcare and medicalDC-to-DC point of load applications