TPS3510D
Active3-CHANNEL SUPERVISOR FOR SWITCH-MODE POWER SUPPLIES
Deep-Dive with AI
Search across all available documentation for this part.
TPS3510D
Active3-CHANNEL SUPERVISOR FOR SWITCH-MODE POWER SUPPLIES
Technical Specifications
Parameters and characteristics for this part
| Specification | TPS3510D |
|---|---|
| Mounting Type | Surface Mount |
| Number of Voltages Monitored | 3 |
| Operating Temperature [Max] | 85 °C |
| Operating Temperature [Min] | -40 °C |
| Output | Open Drain or Open Collector |
| Package / Case | 8-SOIC |
| Package / Case [x] | 0.154 in |
| Package / Case [y] | 3.9 mm |
| Reset | Active Low |
| Reset Timeout | 200 ms |
| Supplier Device Package | 8-SOIC |
| Type | Multi-Voltage Supervisor |
| Voltage - Threshold | 3.3 V, 5 V, 12 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Tube | 1 | $ 2.08 | |
| 10 | $ 1.34 | |||
| 25 | $ 1.14 | |||
| 100 | $ 0.92 | |||
| 250 | $ 0.82 | |||
| 500 | $ 0.75 | |||
| 1000 | $ 0.70 | |||
| 2500 | $ 0.66 | |||
| Texas Instruments | TUBE | 1 | $ 1.29 | |
| 100 | $ 1.00 | |||
| 250 | $ 0.73 | |||
| 1000 | $ 0.52 | |||
Description
General part information
TPS3510 Series
The TPS3510/1 is designed to minimize external components of personal-computer switching power supply systems. It provides protection circuits, power good indicator, fault protection output (FPO)\ and (PSON)\ control.
Overvoltage protection (OVP) monitors 3.3 V, 5 V, and 12 V (12-V signal detects via VDDpin). Undervoltage protection (UVP) monitors 3.3 V and 5 V. When an OV or UV condition is detected, the power good output (PGO) is set to low and (FPO)\ is latched high. (PSON)\ from low to high resets the protection latch. UVP function is enabled 75 ms after (PSON)\ is set low and debounced. Furthermore, there is a 2.3-ms delay (and an additional 38-ms debounce) at turnoff. There is no delay during turnon.
Power good feature monitors PGI, 3.3 V and 5 V and issues a power good signal when the output is ready.
Documents
Technical documentation and resources
