Zenode.ai Logo
Beta
16 SOIC
Integrated Circuits (ICs)

TLV1544IDR

Obsolete
Texas Instruments

10-BIT 85 KSPS ADC SER. OUT, PGRMABLE PWR/PWRDN/CONVERSION RATE, TMS320 DSP/SPI/QPSI COMPAT., 4 CH.

Deep-Dive with AI

Search across all available documentation for this part.

DocumentsDatasheet
16 SOIC
Integrated Circuits (ICs)

TLV1544IDR

Obsolete
Texas Instruments

10-BIT 85 KSPS ADC SER. OUT, PGRMABLE PWR/PWRDN/CONVERSION RATE, TMS320 DSP/SPI/QPSI COMPAT., 4 CH.

Deep-Dive with AI

DocumentsDatasheet

Technical Specifications

Parameters and characteristics for this part

SpecificationTLV1544IDR
ArchitectureSAR
ConfigurationMUX-S/H-ADC
Data InterfaceSPI
Input TypeSingle Ended
Mounting TypeSurface Mount
Number of A/D Converters1
Number of Bits [custom]10
Number of Inputs4
Operating Temperature [Max]85 °C
Operating Temperature [Min]-40 °C
Package / Case16-SOIC
Package / Case [x]0.154 in
Package / Case [y]3.9 mm
Ratio - S/H:ADC1:1
Reference TypeExternal
Sampling Rate (Per Second)87k
Supplier Device Package16-SOIC
Voltage - Supply, Analog [Max]5.5 V
Voltage - Supply, Analog [Min]2.7 V
Voltage - Supply, Digital [Max]5.5 V
Voltage - Supply, Digital [Min]2.7 V

Pricing

Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly

DistributorPackageQuantity$
Texas InstrumentsLARGE T&R 1$ 5.35
100$ 4.37
250$ 3.43
1000$ 2.91

Description

General part information

TLV1544 Series

The TLV1544 and TLV1548 are CMOS 10-bit switched-capacitor successive-approximation (SAR) analog-to-digital (A/D) converters. Each device has a chip select (CS\), input-output clock (I/O CLK), data input (DATA IN) and serial data output (DATA OUT) that provide a direct 4-wire synchronous serial peripheral interface (SPITM, QSPITM) port of a host microprocessor. When interfacing with a TMS320 DSP, an additional frame sync signal (FS) indicates the start of a serial data frame. The devices allow high-speed data transfers from the host. The (INV CLK)\ input provides further timing flexibility for the serial interface.

In addition to a high-speed converter and versatile control capability, the device has an on-chip 11-channel multiplexer that can select any one of eight analog inputs or any one of three internal self-test voltages. The sample-and-hold function is automatic except for the extended sampling cycle, where the sampling cycle is started by the falling edge of asynchronous CSTART\. At the end of the A/D conversion, the end-of-conversion (EOC) output goes high to indicate that the conversion is complete. The TLV1544 and TLV1548 are designed to operate with a wide range of supply voltages with very low power consumption. The power saving feature is further enhanced with a software-programmed power-down mode and conversion rate. The converter incorporated in the device features differential high-impedance reference inputs that facilitate ratiometric conversion, scaling, and isolation of analog circuitry from logic and supply noise. A switched-capacitor design allows low-error conversion over the full operating temperature range.

The TLV1544 has four analog input channels while the TLV1548 has eight analog input channels. The TLV1544C and TLV1548C are characterized for operation from 0°C to 70°C. The TLV1544I and TLV1548I are characterized for operation over the full industrial temperature range of -40°C to 85°C. The TLV1548M is characterized for operation over the full military temperature range of -55°C to 125°C.

Documents

Technical documentation and resources