Deep-Dive with AI
Search across all available documentation for this part.
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | SN74ALS151NSR |
|---|---|
| Circuit [custom] | 8:1 |
| Circuit [custom] | 1 |
| Current - Output High, Low [custom] | 24 mA |
| Current - Output High, Low [custom] | 2.6 mA |
| Independent Circuits | 1 |
| Mounting Type | Surface Mount |
| Operating Temperature [Max] | 70 °C |
| Operating Temperature [Min] | 0 °C |
| Package / Case | 0.209 " |
| Package / Case | 16-SOIC |
| Package / Case | 5.3 mm |
| Supplier Device Package | 16-SO |
| Type | Multiplexer |
| Voltage - Supply [Max] | 5.5 V |
| Voltage - Supply [Min] | 4.5 V |
| Voltage Supply Source | Single Supply |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 1.65 | |
| 10 | $ 1.48 | |||
| 25 | $ 1.40 | |||
| 100 | $ 1.19 | |||
| 250 | $ 1.12 | |||
| 500 | $ 0.98 | |||
| 1000 | $ 0.81 | |||
| Digi-Reel® | 1 | $ 1.65 | ||
| 10 | $ 1.48 | |||
| 25 | $ 1.40 | |||
| 100 | $ 1.19 | |||
| 250 | $ 1.12 | |||
| 500 | $ 0.98 | |||
| 1000 | $ 0.81 | |||
| Tape & Reel (TR) | 2000 | $ 0.69 | ||
| Texas Instruments | LARGE T&R | 1 | $ 1.57 | |
| 100 | $ 1.21 | |||
| 250 | $ 0.89 | |||
| 1000 | $ 0.64 | |||
Description
General part information
SN74ALS151 Series
These data selectors/multiplexers provide full binary decoding to select one-of-eight data sources. The strobe (G\) input must be at a low logic level to enable the inputs. A high level at the strobe terminal forces the W output high and the Y output low.
The SN54ALS151 is characterized for operation over the full military temperature range of -55°C to 125°C. The SN74ALS151 and SN74AS151 are characterized for operation from 0°C to 70°C.
These data selectors/multiplexers provide full binary decoding to select one-of-eight data sources. The strobe (G\) input must be at a low logic level to enable the inputs. A high level at the strobe terminal forces the W output high and the Y output low.
Documents
Technical documentation and resources
